Honeycomb Hinged Storage Box — Large (PIP, 3 sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Big rectangular storage box with hex pattern on every wall + print-in-place piano hinge
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A large rectangular storage box with a honeycomb hex pattern on every wall and a print-in-place piano hinge on the long edge. The lid closes flush, snaps shut, and prints OPEN in one go — no glue, no screws, no post-assembly.
Four ready-to-print sizes are included:
Large — 230 × 130 × 80 mm (general storage)
Tray — 230 × 130 × 40 mm (shallow desk-organiser / jewellery)
Tall — 180 × 100 × 120 mm (pens, cables, utensils)
Compact — 140 × 100 × 40 mm (card-deck / letter-tray footprint)
Print orientation: PIP-vertical (lid stood up 90° behind the body). On the long-edge hinge the lid's print Z equals the SHORT side of the box, so even the Large at 230 × 130 only needs Z ≈ 210 mm — fits a Bambu P2S envelope.
Parametric SCAD source included — override box_x / box_y / box_z at the top of the file to derive your own size.