Dell DKMMLED185-G01 Rail End Substitute
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A subtitute for part of the rackmount rail on a Dell DKMMLED185-G01 KMM
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We've all been there. You excitedly unwrap your lightly used Dell DKMMLED185-G01 Rackmount KMM, only to discover that the shipper has lost one of the rail components that was supposed to be included. Well finally you can rest easy and never experience that disapointment again, because I made a functional substitute (assuming you have a compatible rack).
I'm sure there could be improvements, but honestly this works well enough.
Notes:
This requires you to have rear side-rails like I do. If you have a shallower rack, you could easily modify this to mount to the back instead. I would have done that, but my bed isn't long enough to support it.
I did this in PETG, I suspect that PLA would go poorly.
I wouldn't use this for both sides, but I dunno try it and see I guess.
There is still a very small amount of vertical play in the rail, so you could try adding another 0.5mm of height and see what you get. If you do, let me know how it goes.