1 / 1
HeatCharm I600 Victorian Fireplace Fan Knob — zdjęcie 1

HeatCharm I600 Victorian Fireplace Fan Knob

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement for the HeatCharm I600 Victorian fan speed control knob

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution

My fireplace was missing the fan control knob. I never saw the original, so I just generated a knurled knob as a replacement.

I generated the SCAD with AI - then tuned the parameters after some test prints. Be wary it requires BOSL2.

Recommended to use a filament with high heat resistance, considering it's installed in such a hot environment. I've tried with ABS - if that doesn't hold up over time I'll upgrade it to PET-GF.

I printed this with 100% infill to maximise strength, and because it's so tiny anyways it uses barely any filament. I recommend adding glue to the print bed, as the vibrations from printing the knurling can dislodge it from the print bed.

Tagi