HeatCharm I600 Victorian Fireplace Fan Knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement for the HeatCharm I600 Victorian fan speed control knob
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution
My fireplace was missing the fan control knob. I never saw the original, so I just generated a knurled knob as a replacement.
I generated the SCAD with AI - then tuned the parameters after some test prints. Be wary it requires BOSL2.
Recommended to use a filament with high heat resistance, considering it's installed in such a hot environment. I've tried with ABS - if that doesn't hold up over time I'll upgrade it to PET-GF.
I printed this with 100% infill to maximise strength, and because it's so tiny anyways it uses barely any filament. I recommend adding glue to the print bed, as the vibrations from printing the knurling can dislodge it from the print bed.