USPSA IDPA Foot and Hand Position Markers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A right foot and hand for position marking.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
A right hand and right foot silhouette. both are 3/8" thick. The foot has a spine with reinforced holes for long nails up to 1/2" diameter and large chamfers to help the head sit below flush as well as channels to aid in removal. The hand has 4 chamfered slots for velcro straps or zip ties and a chamfered hole for a drywall screw. These can be mirrored in the slicer for the left version and the hand should probably be printed as a Left and Right version as well to provide a similar texture for both hands. With 4 perimeters and 8% infill, the foot should take just over 2 hours for one side, and the hand should take just over 1 hour for one side.
Both models should be printable without any supports.
You may want to add a few pieces of grip tape to the top surface of each foot and spend some time to bury them flush with the surrounding dirt to avoid tripping or slipping. Remove feet from ground carefully, the slots leading into the chamfer should provide enough space to get a small screwdriver under the head of the nail.
Have fun and be safe!