1 / 1
MicroTube Holder for Gardena/Hozelock Micro-drip Watering System - REMIX - Longer 16cm Length. — zdjęcie 1

MicroTube Holder for Gardena/Hozelock Micro-drip Watering System - REMIX - Longer 16cm Length.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is for the small drip-nozzle tubing, outer diameter 6mm nominal and as such it matches Gardena and Hozelock.

Ocena
0 / 5
Polubienia
4
Pobrania
24
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The original model was 10cm, I made it 16cm.

Prints very easily and you can duplicate the STL on the buildplate to make several at once. 

I used PLA+ 0.4mm nozzle 0,2mm layers with no adhesion or support, 20% lines infill and standard 3 walls seems fine.