1 / 1
MicroTube Holder for Gardena/Hozelock Micro-drip Watering System - REMIX - Longer 16cm Length. — image 1

MicroTube Holder for Gardena/Hozelock Micro-drip Watering System - REMIX - Longer 16cm Length.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is for the small drip-nozzle tubing, outer diameter 6mm nominal and as such it matches Gardena and Hozelock.

Rating
0 / 5
Likes
4
Downloads
24
Makes
0
Views
92
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The original model was 10cm, I made it 16cm.

Prints very easily and you can duplicate the STL on the buildplate to make several at once. 

I used PLA+ 0.4mm nozzle 0,2mm layers with no adhesion or support, 20% lines infill and standard 3 walls seems fine.