1 / 5
MoBa Speed Case for Arduino Speed Measurement — zdjęcie 1
1 / 5

MoBa Speed Case for Arduino Speed Measurement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enclosure for MoBa Speed Arduino train speed meter with 20 cm sensor spacing for N scale.

Ocena
0 / 5
Polubienia
4
Pobrania
18
Wydruki
0
Wyświetlenia
146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

I designed a custom 3D printable enclosure for the well-known “MoBa Speed” Arduino train speed measurement project from n-modellbahn.de.

The enclosure is designed for N scale and provides space for:

  • OLED display

  • Arduino

  • Wiring

  • Two measurement sensors

  • USB connection

The two sensors are placed 20 cm apart.

Depending on the selected base or no base, the unit can be placed:

  • on a neighboring track

  • or next to a track

The design is modular, making it possible to create alternative bases for other scales such as:

  • H0

  • TT

  • other model railway scales

The enclosure consists of:

  1. Main housing

  2. Cover

  3. Base

The electronics are based on the original project: https://n-modellbahn.de/moba-speed/

Thanks to the original creator of the project.

Print Settings

  • Material: PLA

  • Supports: not required

  • Layer height: 0.2 mm

  • Infill: about 10–15 %

Notes

  • This upload only contains the enclosure.

  • Electronics and Arduino are not included.

  • Sensor positions may require slight adjustments depending on the track system.

I’d be happy about likes, downloads, and especially your makes and photos of your versions. 😊

Tagi