MoBa Speed Case for Arduino Speed Measurement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for MoBa Speed Arduino train speed meter with 20 cm sensor spacing for N scale.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I designed a custom 3D printable enclosure for the well-known “MoBa Speed” Arduino train speed measurement project from n-modellbahn.de.
The enclosure is designed for N scale and provides space for:
OLED display
Arduino
Wiring
Two measurement sensors
USB connection
The two sensors are placed 20 cm apart.
Depending on the selected base or no base, the unit can be placed:
on a neighboring track
or next to a track
The design is modular, making it possible to create alternative bases for other scales such as:
H0
TT
other model railway scales
The enclosure consists of:
Main housing
Cover
Base
The electronics are based on the original project: https://n-modellbahn.de/moba-speed/
Thanks to the original creator of the project.
Print Settings
Material: PLA
Supports: not required
Layer height: 0.2 mm
Infill: about 10–15 %
Notes
This upload only contains the enclosure.
Electronics and Arduino are not included.
Sensor positions may require slight adjustments depending on the track system.
I’d be happy about likes, downloads, and especially your makes and photos of your versions. 😊