2 to the xth minirack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 10" 4u minirack, meant for mounting server gear.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the 4u minirack. I will keep this description short. Use the CAD file, where the model is fully assembled, to build it. You will need #10-32 screws to build it, which I got from my disassembled Ender 3. To mount the pis in the trays, you will need the standard M3/M2.5 screws that are supplied with some hats. Please leave comments with what you would like me to design mounts for next! Also include dimensions in metric. By the way, the NetGear switch mount is for the GS308. I call it the 2^x rack because I like all numbers formed by that, and also because it has 4u (2^2) of space, the modules take up either 1 or 2u (2^0 or 2^1) of space, and for many other reasons. See how many you can spot
By the way, to print, you'll need 4 corner pieces, 8 straight pieces, 16 #10-32 screws to get started (not to mount the modules, you need more). Assemble them as shown in the CAD file.
You will need to mount the trays and the mount together with #10-32 screws.
Good luck!