10 Modular Inch Server Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular 10 inch server rack that can cater to your needs, no matter the size requirements.
- Ocena
- 5 / 5
- Polubienia
- 74
- Pobrania
- 311
- Wydruki
- 4
- Wyświetlenia
- 2201
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
100 Downloads! Thank you for the support!
07/07/2026 Update - Fixed the Front/Back Brace so it is now printable with no supports. Now labelled Front Back Brace V2 in 5U folder. Thanks to Anton for bringing it to my attention.
12/08/2026 Update - Added an extended rack that uses less filament, less bracing and can accommodate more in the rack. Will add shorter vertical posts in the near future. They do require 8 M6 x 25mm bolts.
Support me on Ko-fi using the link below to help support me and future works.
https://ko-fi.com/craiglindeman86
10 Inch Modular Server Rack – 5U, 4U, 3U, 2U variants
I required a 10 inch server rack but found no existing design that fit my needs. This is my own design. Every model fits on a Bambu Lab P1P or similar sized build plate. The maximum height is 5U. Smaller racks (4U, 3U, 2U) are available to print when less than 5U of space is required.
External dimensions (5U rack)
Width: 266 mm
Height: 285.30 mm
Depth: 240 mm
Internal usable space (5U Rack)
Length: 228 mm
Width: 222.225 mm
Height: 222.225 mm
Recommended materials
PETG, ABS or ASA
Print settings
Walls: 4
Top/bottom layers: 4
Infill: 15% gyroid
Hardware required (minimum for basic rack)
16 x M6 x 16 mm nuts and bolts. More needed for mounting equipment.
Printed parts – basic rack
Vertical posts: 4 (supports required). Flip two posts for the opposite side.
Side braces: 4
Front and back braces: 4
Available part variants
Vertical posts: 5U, 4U, 3U, 2U
Side covers: 5U, 4U, 3U, 2U (optional)
Front and rear brace (one size fits all models)
Side brace (one size fits all models)
Top and bottom cover (same model fits top and bottom)
Feet for front, back and sides (optional)
All models use the same front braces, back braces, top cover and bottom cover. Only the vertical posts change per rack height. Side braces are universal. Side covers are optional and height‑specific. Front/back braces and side braces have holes for mounting.
File format
All files provided as STL. Models are oriented for best printing. Only vertical posts require supports. A complete .3mf file containing all models is also included.
Assembly notes
Assemble using M6 hardware through the holes in braces and posts. Feet are optional.