Propagation Tube Holder for HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder for the HSW that will hold little tubes for plant propagation. I will link the tubes i used below.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a way to hang propagation tubes on the wall and have them interchangeable and also look good and i think with the help of the HSW i have nailed it. This simple Propagation Tube Holder will hold any tube that has a neck width of ~35.5-37mm, i will link the exact tubes i use below. I printed these in PLA+ with standard 2 wall loops and a 15% infill which pretty much makes the holder bit solid. I have not had any snap on me since i started printing them this way. I will post some more photos later on once i get the full setup i have in mind, but for now here is the model. Hope someone can find and enjoy it =D
Here is a paid link to the exact tubes i used from amazon - https://amzn.to/4uRvtWX They come in 12/24/48 pack.