66 modeli
Mountable enclosure for HCW-M421 Delay Timer Module. Requires: 4x M3 heatset inserts 4x M3x15mm brass standoffs 4x M3x6 screws of your choice for the lid Update 1: Added option of Lid with Integrated Standoffs in Lieu of Brass Standoffs…
One base with screw holes, one without. The lid should be orientated so the lugs don't push on the capacitors. 0.20mm, shouldn't need supports.
an easy way to connect two hcw panels or just to have two inserts
Holds 7 or 5 pliers to 3 slots, attaches to 3 empty inserts.
Enclosure for XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage Low Power Disconnect Output Board. Includes buttons, cover, base box.
A case for the HCW-P715 USB 5V/5A converter wich can be used to power the Raspberry Pi or Creality Wifi-box directly from the printer power supply. Made to be mounted on the 40x40 Aluminium profiles with 3mm T-nuts. One version with a…
A durable, precisely designed caliper holder for HCW models, ensuring easy access for precise measurements.
This model is definitely for you if you want your tweezers accessible from the side. Thanks to hexagonal socket you can tilt them either wat and also mount them vertically. Please notice that this holder does not fit the wall socket…
2025/12/07 update: I've added a case with cutout for KCD11 button to cutout input power. This was created because in cutoff state it would still be drawing some current for the internal converter, relay and display which is not optimal…
Portrait printing using forced supports for holders to HCW
A hook to hold the snip
Honeycomb Wall mount, holder for new Fanttik F2 Master rotary tool.
If you have any suggestions or requests I am more than happy to help. Drop requests and suggestions in the comments! Make sure to leave a like if my models help you! You doing this helps other's like yourself find my models! Printed in…
You can print models while standing. I recommend the forced supports for the bottom arc of the opening and the rear fixing inserts, it prints nicely with a 0.3mm layer height.
I made a Handy 6 storage/compartment box. I store M3, M4, magnets and bearings
HCW Cigarettelighter holder with FreeCAD ( RT ) file. I printed it with 0.20 mm layer height PLA
A sturdy, precisely designed scraper holder for HCW models, ensuring secure storage and easy access.
Like the original designer I wanted a version of these that did minimal lift off the wall to keep them as close possible. This was to reduce flex in the wall when adding new items. I reworked the threading some at the top and bottom along…
Wall mount for Fanttik soldering iron compatible with Honeycomb Wall storage solution.
Made a Lensholder for the Honeycomb Wall holding standard NIKON Lenses. No supports. Infill as you like Printed it in 1.25h on my K1Max with 20% Infill. No Supports What else should i say ? if you have a K1 Max, check out my LED Lid Raiser
I needed a bobbin holder for my upholstery shop and already have the HCW up holding tools by the machines. So I just needed the bobbin holder. I was going to model something but noticed both of what I needed exist, they just needed to…
Holds 3 Brushes to a HCW. Inserts are 1.8mm so that it fits my brushes.
This is an enlosure (bottom and top) for the PicoW while hosted on an ElectroCookie PCB that measures 2.05" x 3.5". The PCB's mounting holes use M3 for the center holes and M2 for the corner ones. The PCB mounts to the bottom part of the…
I thought my cheap brass brush would be common and I would find a suitable holder. Apparently it is not that common, so I made one. Please notice that this holder does not fit the wall socket directly . It matches the hexagonal socket of…
For honey comb wall board
Update I'm removing the part for the left wall. I have noticed that the holes in the walls of the enclosure are not symmetrical. I have used a hole for the spool holder which does not exist on the left wall. Mounting You will need at…
I made this in Tinkercad to fit my multimeter. Very tight fit with cable holder. Use heatgun or similar if too tight. can be bought here: https://amzn.to/3tRcMsx
Hello Made this in Tinkercad for anyone that has the same drills or want to use 6 favourite screws I bought mine here: https://amzn.to/3S4Nl02
A back cover for the popular electronic timer, to protect against accidental short circuit on the board when setting up and experimenting with it. Attention! This timer is not designed to control 220 V electrical appliances, only up to 30…
This is a Honey Comb Wall holder for the Fanttik B8 Ace Air Duster and attachments.
Easy to print, bracket to hold Craftsman Digital level on the wall. Print on its side. uses M3 Bolts and honeycomb blanks with 3mm bolt hole to attach to wall
Hello I made this in Tinkercad for my files: I bought them here: https://amzn.to/3TPtt29
Storage items for various tools and accessories on the Honeycomb Storage Wall system. The HW Slide Hook is the base. Designed off a concept of slide on organizers so they can easily be lifted off the wall to sit down on the bench for…
Hey there, WORK IN PROGRESS: The spaces are a bit to small for the boxes they fit in, but sometimes u clip out the others. i have to tinker a bit with that. but still it is working as a shelf to put them on. this is the Remix of the HCW…
Remixed a wallmount for the Niimbot B1 to make it mountable to a Honeycomb storage wall
This model is for the Honeycomb Wall Storage System - This is for designed for standard lab glass slides that are used with a microscope. The Flats have ridges to hold the Slides securely, but also allows for air flow for quick drying.…
no supports needed needed a new mount for my camera made to view my rook 3d printer webcam: https://www.amazon.com/dp/B09KCJ36FSpsc=1&ref=ppx_yo2ov_dt_b_product_details
I made this in tinkercad. Very tight fit, please use heatgun or similar if needed. bought it here: https://amzn.to/4aHYnzF
A mount for the Elegoo Vacuum Sealer for the Honeycomb Storage Wall
I made this to mount my a8 to my hcw panels print the 2 parts, then print at least 2 (I used 3) HCW single studs/mounts place the 3 hcw studs in the holes you want to use, apply super glue/ 2part epoxy to their faces & then press the back…
The buck converter (HCW-P715) can be installed on the back side of the MK3 and MK4 frames (above the main board).The buck converter can be installed on the back side of the MK3 and MK4 frames (above the main board). Screws Needed: M3*19 *2
Print Settings: Primeters 4, 20% infill Material: PETG The Inserts on these models are rotated to match a improperly installed HCW like mine seen in the photos.
Used to hold a 4" brayer from speed ball on the Honey Comb Wall
Durable and precisely designed battery holder compatible with HCW V9 models, ensuring secure and reliable power storage.
print on its side with supports and it works great.
It needs no supports, prints pretty fast and doesn't use much material. It relies on an empty insert to be fitted in pretty tightly. In case a less tight fit is needed let me know
A filament holder with a lip on the end to hold it on cis ompatible with the honey comb wall
Print Settings: Primeters 4, 20% infill Material: PETG The HCW Inserts for on these models are rotated to match a improperly installed HCW like mine seen in the photos. WARNING I had to file/sand my inserts that stop the charger from…
Print Settings: Primeters 4, 20% infill Material: PETG The Inserts on these models are rotated to match a improperly installed HCW like mine seen in the photos.
A small mount for your woojer on your hcw. Easy to print. No supports needed. Its purpose is to display your woojer on your setup
I printed this case using PETG. The base part does not require supports. The cover requires supports in some areas. I’ve added belt holes to the cover so it can be secured to posts or other objects with zip ties.
Print Settings: Perimeters 4, 20% infill Material: PETG The Inserts on these models are rotated to match a improperly installed like mine seen in the photos. And the fit was very tight for me.
This is my first designed model ^^ The connectors will still be available. To make it hold the best, put it slightly off center, the stock rubber feets will make it hold better,
Print Settings: Perimeters 4, 20% infill Material: PETG The Inserts on these models are rotated to match a improperly installed like mine seen in the photos.
Print Settings: Primeters 4, 20% infill Material: PETG The Inserts on these models are rotated to match a improperly installed like mine seen in the photos, Use some bolts, nuts, and washers you have lying around to attach the shark wall…
A mount for the Elegoo Vacuum Sealer for the Honeycomb Storage Wall
This is my first designed model ^^ The connectors will still be available. To make it hold the best, put it slightly off center, the stock rubber feets will make it hold better,
Remixed a wallmount for the Niimbot B1 to make it mountable to a Honeycomb storage wall
Hello Made this in Tinkercad for anyone that has the same drills or want to use 6 favourite screws I bought mine here: https://amzn.to/3S4Nl02
I made a Handy 6 storage/compartment box. I store M3, M4, magnets and bearings
I made this in tinkercad. Very tight fit, please use heatgun or similar if needed. bought it here: https://amzn.to/4aHYnzF
I made this in Tinkercad to fit my multimeter. Very tight fit with cable holder. Use heatgun or similar if too tight. can be bought here: https://amzn.to/3tRcMsx
