ISO 20 / SK20 Toolholder Fixture – ER11 / ER16
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toolholder fixture for ISO 20 / SK20 spindles with ER11 or ER16 collets. Fills the gap where standard CT40 blocks don't
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A toolholder fixture designed specifically for ISO 20 / SK20 spindles with ER11 or ER16 collets.
Standard collet key blocks (such as the Haas CT40 version) do not fit ISO 20 / SK20 toolholders — these lack the groove that larger toolholders use for fixturing. This block solves that problem.
Milled from aluminum/stainless steel. Mounts to your bench with four screws. Holds the toolholder securely while tightening or loosening the collet nut.
Specs:
Compatible: ISO 20 / SK20 toolholders
Collet sizes: ER11 and ER16
Material: aluminum (original), printable in PETG or ABS
Bench-mount: 4x screws
No hardware included — standard M-screws
Designed and made by Wouter Dijkman — metalart.nl