ISO 20 / SK20 Toolholder Fixture – ER11 / ER16
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Toolholder fixture for ISO 20 / SK20 spindles with ER11 or ER16 collets. Fills the gap where standard CT40 blocks don't
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
A toolholder fixture designed specifically for ISO 20 / SK20 spindles with ER11 or ER16 collets.
Standard collet key blocks (such as the Haas CT40 version) do not fit ISO 20 / SK20 toolholders — these lack the groove that larger toolholders use for fixturing. This block solves that problem.
Milled from aluminum/stainless steel. Mounts to your bench with four screws. Holds the toolholder securely while tightening or loosening the collet nut.
Specs:
Compatible: ISO 20 / SK20 toolholders
Collet sizes: ER11 and ER16
Material: aluminum (original), printable in PETG or ABS
Bench-mount: 4x screws
No hardware included — standard M-screws
Designed and made by Wouter Dijkman — metalart.nl