P
Printables
er16 nut fan
Fan for er16 nut in spindle
Search results: er16
Counting matching models…
P
Printables
End Mill and ER16 Collet Organizer
Remix of MBradys End Mill and ER11 Collet Organizer to use with ER16 collets It is only the upper tray (Drawer_3) that are changed One tray with 8 ER16 collets and 8 bits and one with 12 ER16 collets and 4 bits (and 2 small bit areas)…
P
Printables
Gridfinity ER16 Collet Holder
Holds a single ER16 Collet + Holding Nut. Created in Autodesk Fusion360 with the GridfinityCreator Plugin. For labeling, text can be added/modified in the .3mf file. I added a filament change at the 34.6mm to increase visibility. Printed…
P
Printables
ER16 Collet Holder
ER16 Collet Holder. One model is a 4x4 grid and the other is a single holder that can be patterned out to make whatever size grid you need.
P
Printables
Gridfinity ER16 Collet holder
It has a 4x2 pattern and (note) it has to be the topmost cup as you cannot stack one on top of it (otherwise I would have had to add 1 more height unit, which does not suit my needs). I need them very often, so they have to be at hand -…
P
Printables
Collet holder ER16 ER20 ER25 (for 9, 12, 15 or 18 collets) Spannzangenhalter
Collet holder for 9, 12 , 15 or 18 collets of type ER16, ER20 or ER25. Please see 3D model for details. 9, 12 , 15 or 18 collets can be stored. No dirt collects in the recesses as it falls out at the bottom or rear.…
P
Printables
ER16 collet box/ER16 Spannzangen-Box
I made a box for my ER16 collets. Ich habe eine Box für meine ER16 Spannzangen gemacht.
P
Printables
ER16 spring collet organizer
Holds a maximum of 144 collets but is more user friendly if an empty space is left between the collets. I have printed this in PLA and PETG with good results.
P
Printables
ER16M Wrench Gridfintiy Bin
Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. My other Gridfinity Designs: 1/8" Endmill Holder:…
P
Printables
Collet Storage Box - ER16 Tray Insert
Use with storage box https://www.printables.com/model/1107368-collet-storage-box-configurable-internal-trays
P
Printables
ER16 Collet Holder for GARANT GridLineFinity
can be printed with standard Settings on most Printers No Support necessary! Possibly Print with MouseEars, corners can have BedAdhesion Problems on some PrintBeds
P
Printables
Handgriff mit ER16-Spannzange
Werkzeughalter für Kegelsenker, kleine Gewindebohrer usw. Die Spannzangen entsprechen ER16-Spannzangen. Sie haben einen Spannberich von ca. 0,5mm nach unten, d.h. so könnt ihr zum Beispiel einen 3,3mm Bohrer in der 3,5mm Spannzange…
P
Printables
Gridfinity ER32, ER25, and ER16 Collet Holders
ER32, ER25, and ER16 Collet Holders For Gridfinity Designed to to press fit for magnets for easy insertion and channels for easy removal.
P
Printables
ER16 and ER11 collet holders
Trays to hold collets for ER11 and ER16 tool holders. Simply needed more tools for my cnc drawers.
P
Printables
CNC Collets gridfinity bins - ER16 - PG10 - Rack and organizer
Organize your CNC collets in drawers or desk with gridfinity bins. This bins have holes for 6x3mm magnets. The top bins surface is 5 degrees tilted. 3 types of bins: ER16 collets PG10 collets. General bin to store anythings you want If…
P
Printables
ER16 Collet Holder - Magnetic!
Magnetic Tray for ER16 Collets. Uses standard Neodymium magnets available at Harbor Freight or online. Test prints in PETG with 0.3mm Draft Settings
P
Printables
Spring loaded engraver bit for ER16 collet (ER11 to ER16 remix)
Description This is a remix of “Spring loaded engraver bit for ER11 collet” by dulouie , adapted to be clamped in an ER16 collet . Purpose: PCB solder mask engraving / opening with a spring-loaded mechanism that adds compliance and helps…
P
Printables
All collet holders, ER8, ER11, ER16, ER20, ER25, ER32, ER40
Dimensions: 150 x 130 x 29mm and 150 x 64 x 29mm for the halved version Fixed issue where stl models were 10x smaller
P
Printables
ISO 20 / SK20 Toolholder Fixture – ER11 / ER16
A toolholder fixture designed specifically for ISO 20 / SK20 spindles with ER11 or ER16 collets. Standard collet key blocks (such as the Haas CT40 version) do not fit ISO 20 / SK20 toolholders — these lack the groove that larger…
P
Printables
Gridfinity ER16 Collet Holder
1x2x3 Gridfinity collet block. Very compact storage for 8 ER16 collets. Empty Stackable
P
Printables
ER16 Gridfinity Bin
Designed to suit 24x ER16 collets in a compact form factor Based on a 2x3 standard gridfinity grid.
P
Printables
Holder for Panasonic Hair Trimmer (ER1611)
I´m trimming my hair in the shower and don´t want to leave the shower with hair all over my body. So I needed a place to put my hair trimmer while showering. I attached the holder with two double sided tapes onto the outside glas panel of…
P
Printables
ER16 Collet wall holder
These are designed to bring organization to the machine room at Stockholm Makerspace Originally Published on YouMagine back in 2016, and designed a couple of years earlier, when I was still using SketchUp to make models.
P
Printables
Gameboy, NES and SNES case designs for Sweet16 and Super16.
These are case designs for the Sweet16 and Super16 macropads by 1UPKeyboards . All three are marked as RC1 (release candidate 1) because I made them an age ago and haven't had a chance to update them since. These were designed for the…
P
Printables
Collet Holder - Organizer for ER16
Collet Holder - Organizer for ER16 A practical stand for storing collets ER16. You can print several and stack them in layers, you can also print a stand for other collets (ER40, ER32 or ER25 - which I have in my models) - they will also…
P
Printables
ER16 Collet stand
I needed a nice way to keep trak of some ER16 collets and a chuck for them so I made this block. It holds 10 collets and is easy to print in whatever material and printer you would like.
P
Printables
Modular ER16 Collet Rack / Tray / Stand
fully modular rack system for ER16 collets. you can print as many elements as you need and connect them together. there are three types in order to be able to build a smooth tray without protruding connectors. ER16_Colletholder - is the…
P
Printables
ER16A collet wrench 25mm
I made this wrench some time ago when I was missing the correct 25 mm / ER16(A) wrench size to change collets on my AMB 1050FME milling motor. As I am only changing the collets and the print is pretty strong until now, I never bothered to…
P
Printables
ER16 collet rack
I have created a ER16 collet rack for my mpcnc. The model was developed for milling but is also suitable for printing. Text has 2mm deepening also in german or without text.
P
Printables
Tormach ER16/20 Wrench Holder
Print in TPU or PETG. Bench mount Tormach ER16 / 20 wrench holder.
P
Printables
Compact ER16 Collet and Nut Stand 21pcs
A compact stand for X21 ER16 collets along with two spare A-type nuts. Step file attached in case you need to change quantity.
P
Printables
Collet Organizers - ER32 and ER16
Maximize your storage space and keep things organized with these ER16/32 collet trays. Each tray measures 1 x 4.5 x 4.5 inches. Each ER16 tray has 16 locations in a 4x4 pattern, and the ER32 tray has 9 locations in a 3x3 pattern. Want to…
P
Printables
ER11, ER16, ER20, ER25, ER32 collet conical wiper
ER11-ER32 wipers for collet holders. Should print best in the original orientation cone down. I printed them on a i3 MK3 with structured bed, 0,4mm Nozzle, PETG, 3 perimeters and 25%infill. For ER11 up to ER20 i suggest using a brim (i…
P
Printables
ER16 Collet Holder - Gridfinity
ER20 collet holder compatible with Gridfinity - or use it on it's own.
P
Printables
Gridfinity 10x ER16 Holder
A simple 1x3 GridFinity holder for ER16 Collets. Holds 10x collets.
P
Printables
Spannzangenwandhalter ER16
Ein Wandhalter für ER 16 Spannzangen mit Spannzangenhalter 100mm zur Wandmontage mit 2 Schrauben.
P
Printables
ER16 Collet Tool Case
Fits any ER16 collet of any various range of sizes. Made revisions to this to prevent the collets from falling out in transport Highly recommended to print in PETG (I printed this in ABS). If you do choose to print it in PLA, fit the top…