Tuya Smart Sensor TLC2206 Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall or post bracket for the Tuya TLC2206 ultrasonic tank-level sensor: a ring that holds it flat above the water.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A wall or post bracket for the Tuya TLC2206 ultrasonic tank-level sensor (sold by EPTTECH, Wi-Fi or Zigbee). The sensor needs to look straight down at the water with nothing in the way: this holder keeps it flat in a ring, about 5 cm out from the wall, above a rainwater tank, a well or a cistern opening.
Features
Ring 73 mm inside and 85 mm outside, with a ledge the sensor rests on.
Arm of about 5 cm between the wall plate and the ring.
Wall plate 45 × 70 mm with screw holes.
About 150 mm long overall.
Print settings
PETG or ASA for outdoor use (PLA softens in the sun).
0.2 mm layers, 4 perimeters, 30 % infill.
Installation
Screw the plate above the tank opening, drop the sensor into the ring, then enter the installation height in the Tuya app (or in Zigbee2MQTT for the Zigbee version) so it can work out the water level.
En français
Support mural pour le capteur de niveau à ultrasons Tuya TLC2206 : un anneau de 73 mm tient le capteur à plat, à environ 5 cm du mur, au-dessus d'une cuve ou d'un regard. Imprimer en PETG ou ASA pour l'extérieur.