Ball Valve (Groco IBV-750) Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket that allows secure mounting of a Groco ball valve.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Many ball valves do not have mounting plates. The two-part bracket holds a Groco IBV-750 (or similar) ball valve securely in place and provides a mounting plate. The two pieces are meant to clamp together using 1/4-20 threaded heat-sink inserts. Step files exported from Fusion360.
Note: the hexagon housings on either side of the Groco valve do not always align with each other and I think each valve's alignment can be different when assembled. See photo "Valve-Housing-Hexagon-Alignment." I think I was lucky and both valves for which I needed brackets had similar alignments (but not exact). The tolerance of the base and clamp are such that you can still clamp them together if alignment is close.