Hydroponic Tower - Module Adapter with screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to overcome a problem that i had with the original module adapter when using a repurposed HD-PE…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to overcome a problem that i had with the original module adapter when using a repurposed HD-PE container. As HD-PE wont stick to anything i decided to make a modified version of the bucket adapter that has some screw hole and M16 plastic screws and nuts.
This avoids rotation of the adapter when undoing the lock position from the top modules
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
70
Filament:
Generic PETG or PLA
Notes:
Printing:
* Screws and nuts: For these use a high infill (>70%) and compensate with horizontal expansion (-0,25mm in my case) in case of a too tight fit. Use bed only supports for the screws * Adapter: print with same settings as the originalMaterial: For the the adapter is highly recommended that you use PETG as if you print with PLA and have some height on it for long periods of time it WILL bend for sure.
Category: Outdoor & Garden