The Canadian Filament rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a filament rack that uses old hockey sticks as the "rods" they can be found behind any rink!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a filament rack that uses old hockey sticks as the "rods" they can be found behind any rink!
Model uses senior sized sticks, most of then fit unless they have a non rectangle size.
Cut my pieces to 17" (fits 6 standard rolls) and 34" for the pass through racking.
Model consists of 4 different pieces,
-the top/bottom piece goes on the top and bottom of the rack (4 corners)
-the middle side, is for the outside middle
-the bottom pass through is to fit mid shaft of the stick for modular racking
-the middle passthrough is also for modular racking
Completely modular! Make it as wide or as tall as you want, hockey sticks are crazy strong and wont bend like most racking!