Liczymy pasujące modele…
Updates: V1.1 - 1/14/2024 - Google depreciated their QR code generator. I have converted to using quickchart.io for QR code generation. Some changes in the setup instructions, some changes on the backend though. Changes noted here: ●…
Do you find it difficult to concentrate when reading a book and mix up sentences you read? We have something you will absolutely love! This is the brand new reworked and redesigned pencil topper which will help you concentrate while…
RECENT UPDATES January 13, 2024 Licensing has been updated and opened up to BY. Moved old updates to the bottom of the description to keep intended information up top. Added a zip file (Modular Pallet Rack Base Kit Step Files (No Panels))…
6x MG90s Servos Note that several other types of servo with similar form factors may also be compatible with the mechanisms, but not all have been tested at this time 1x Eye Mechanism Controller Board On a tighter budget or if you’d just…
All parts can be printed with PLA. Layer: 0.16 or 0.2 Infill: FullAll
Accessory for my Modular Racking System UPDATES May 7, 2024 Added step files of the models September 03, 2023 The baseplate has been updated! There are now some holes on the sides to allow you to fasten it to the new accessory beams. You…
Presenting, the Tracking Fob The Mandalorian'. Please Note: * These models are not meant for commercial use in original or derivative form. The design is meant for personal use only. All original concepts and likeliness of the design are…
~~~~~~~~~UPDATE~~~~~~~~~ Check the downloads for some fixes/improvements in the design. Watch this video to see the concept and how it plays in the park: A few things to know: You're going to need a MagicBand+ The Batuu Bounty Hunters…
Magnetic 3D scanning marker tower with minimal footprint. For 10mm stickers, 4mm magnets.
Many modular systems rely on the DAP MP-1 Master Panel 19" 2U, which I didn't have available, so I made a printable version. The two pieces can be printed on 256x256 bed and glued and/or screwed together. It provides 10U horizontal split…
This model more closely resembles the wire decking on the racks in our warehouse. This is made to go with this model: https://www.printables.com/model/561782-mini-warehouse Don't forget to post your makes and get your prusameters! I love…
Stackable low volume 3D marker platform for 3D scanning. Easy transport, low volume in case. Added model with grips as the plain one could be difficault to grab if its on a surface with marking stickers. Scale it to your desired size when…
Import from Thingiverse. A tracking and GoTo mount for DSLR astrophotography. Even works for higher focal lengths, up to roughly 300mm. For questions, discussions and stuff head over to r/openastrotech OpenAstroTracker Kits Now Available!…
You can glue the white disk if you want, but it is not necessary if the tolerance of the machine is correct. It can be easily resized to the size you need Material: Several type pla Layerheight : 0.25mm
The original XY joints of Voron 0.1 tends to crack along the layer lines when tightening the flat head screws. This fix enlarged the countersink holes so the screw head can be flush.
Flat pattern of dodecahedrons for 3mm reflective 3D scanning marker dots. Slots for 4mm magnets underneath.
See here an awesome make, made by afourney Optical illusion - a following skull "Murray" (from Monkey Island) appears to be following you with his eyes and head. Watch the animation below. The principle is quite simple, but it looks…
As is for Ø3mm reflective markers, Ø6mm stickers. Ø5mm magnet. Minimal footprint.
Accessory for my Modular Racking System Hardware haters, rejoice! These two-piece rivets are a printable alternative for using M3 fasteners on my racking. There are square headed and round headed variations of 3 lengths (equivalents of…
Hi! :3 If you're like me - that is, too broke for proper FBT but still wanna hang out with your favourite furries and anime girls on VRC and also like to use your legs - I have good news for you! The joycon tracking method isn't new,…
It's not a remix but a 3D modelling from the beginning, the biggest inspiration for me was https://www.thingiverse.com/thing:260088 Size: size is: 27, 43, 62, 74.
Accessory for my Modular Racking System This adds a set of short beams and two variants of uprights to be used in the center. It allows you to divide your sections further for a little more options with storage. The beams must be mounted…
this is a DIY Solar Tracking System for USB mobile charging Designed By Hisham the part list is shown below arduino code file uploaded with files wiring also uploaded with file using Fritzing App http://www.fritzing.org Print Settings…
Tired of squeaky belts? This little adjuster gives you easy leverage to adjust the angle of the tensioner pulley, while tightening down the screws, to align it to the drive pulley. This will allow the belt to track in the middle of the…
Health tracker clip for player character boards in Sleeping Gods: Distant Skies. By default, the game wants you to use damage markers to track player health, but they are easily displaced by bumping the table. I recommend printing the…
DIY head tracking device intended for cap use. A remix to iTrooper's version https://www.thingiverse.com/thing:707734 Update 03.07.2022 Models updated with new dimensions that is close to FreeTrack's suggested hardware dimensions. Only…
Accessory for my Modular Racking System There is a short and a long set. They join the beams at a 45 degree angle. I chose 45 over 90 due to the length of the outside beam with a straight 90 (It does unfortunately mean needing an extra…
This Racking Cane Holder clips right to the side of your bucket or to a carboy! Allows you to adjust height of siphon. Will hold standard sized auto racking canes (22mm diameter). Easy to print with no supports. Designed with Fusion 360…
I created a couple of tracking targets for 3D scanning. Ikea Skadis is used as a Base plate. Since my 3d Scanner keeps loosing its tracking i came up with the idea of a scanning station. Inspired by commercial versions i designed tracking…
Hello! I recently bought a vive, and I received 3 extra controllers as a way to get full-body tracking in VRChat. I couldn't afford the Vive trackers so I thought I'd make something to solve my issue. I designed these mounts to sit at the…
Place on build plate with the largest part of the taper facing down. Supports required for locking features. print two per pole, 8 needed per wire rack shelf.
On top of the box you can attach a laminated savings tracker sheet , where you cross off the amounts you put inside. This simple system adds a bit of gamification and helps you visually track your progress toward your savings goal. Design…
needs support but easily removable, also uses m2 heat set inserts (i used the ones from cnc kitchen/ also aso available from prusa e-shop) and din912 m2 x 5mm bolts (A2 stainless, to prevent rust)
This is an auto-siphon racking cane holder for attaching to a bucket. Fits 22mm diameter. I printed mine 100% infill, but play around with whatever works best for you.
for use with a usb cable for power, Check the photos for the dimensions of the clip for the tracking software
A simple racking system for lego minifigures that is quick to print and uses a minimal amount of filament. Can be easily glued together to stack as your collection expands and also mounted to a wall.
My nephew who is just learning multiplication had trouble using the multiplication table on paper. When he tried to track rows and columns to find the results, his finger would easily slip in a different row or collumn. This is a simple…
If you're here for a Valve Face Tracker Mounting solution that's nice and sturdy you've come to the right place! Just download the Frunk replacement, swap it for the current one, and then you're good! However if you wish to assemble your…
The Egg Bubble Piercer is a simple yet effective kitchen tool designed to prevent eggs from cracking during boiling. This small device features a sharp, needle point that gently pierces the air bubble inside the egg. By doing so, it…
Blank plates for the DAP 2U MP-1 panel or on my printable version , available in 1,2,3 or 4u. Other DAP mount modules are available on my profile
This is a minimalist TrackIR holder which ensures the right (default) distances between the IR-leds.
Build a time tracking cube! Flip the cube to switch between tasks so you can automate your time sheets. An accelerometer tracks orientation and neopixels light up each task. Use Adafruit IO to log data into a feed and store timestamps of…
6DOF headtracking clips to be used with FreeTrack, TrackHat or other similar headtracking systems. Inspired by http://www.thingiverse.com/thing:62827 . I created two versions of clips to keep the two halves of the arms together. One…
Holder for a 3/8" hose holder with an oversized clip for odd shaped carboys. Easy to print with no supports. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: No Resolution: 0.1 Infill: 100 Filament: Inland…
This model is from 3 3d printed parts and a piece of wire.
Never forget to add your +1s, -1, lethals, or target debuffs again. Double sided, a pattern around the outside indicates if the modifier applies to incoming or outgoing attacks. There are also tokens for marking units for things like Oath…
I lost the feet that came with the racking so I made these as replacement the seem to work well at the moment these are printed with a 0.30mm layer height with a 15% infill and with TPU filament on the G code is for 4 feet
It takes an average of around 70 days to build a new behavior into your life. It takes conscious daily effort and deliberate choices to achieve the goal of forming a new habit. The idea behind the design of this trophy is to help track…
It can be a pain for a game master to track monster stats when they have more than a few miniatures on the table - making sure they know which one has moved, how many hit points each has remaining, which one has the fancy sword, etc. -…
Needed to hang some of my larger tools and randoms that I need on a day to day basis so I decided to design a few brackets. I will likely be adding some drill mounts on double clips or something to that effect soon but for now, I just…
This model is intended only as a basis for subsequent tuning.
I made this model as a couple of the feet that came with our racking system have gone missing. I would put felt on the bottom to keep your floors from getting scratched, and it makes the racks easier to move. I printed it at 0.2 layer…
This model replaces the OEM covers that come with the line tracking module on the fourth version of the Elegoo Smart Robot Car. They keep the sensors from bending back if there's an impact, but they can come off and are easily damaged.…
I built this to have an easy switchable thing, that I only need when flying analog or headtracking. detachable and without interference the Antennas. Original Headtrack Modul from Caddx Analog modul is Eachine Pro58 DVR Board from: cooeye…
NOTE: THIS IS FOR TOUCH VERSION ONLY ON THE T-DISPLAY S3; I am working on the non-touch version of the model which will come in a future update. there is now a GPS Version which I’ve uploaded as a remix, otherwise it’s all the same! QUICK…
This module allows mounting two 3.5" HDD to the DAP 2U MP-1 panel or my printable version . It uses 3U. I recommend using PETG for strength as 3.5" HDD are quite heavy. Other DAP mount modules are available on my profile
Remixed the tracking fob body made by HeyBruceWright to allow a usb c port to be added to the bottom. You will need: -Soldering iron/solder -Wires -USB-C Breakout from Treedix -M3 screws
was limited by bed size so altered some items. wanted to mount on the wall so made a shelf.
This is a simple square mount that allows a filter to be added to a PS3Eye cam. A common use for this is when building an IR LED head tracker, where a piece of floppy disc or exposed film can be used to filter out non-IR light. I tried…
This is my solution to motorize R.A. axis on stock telescope EQ mount. No irrevisible modifications of the mount needed. Just print and snap it on. Accurate enough for visual, nothing more, nothing less. It includes: NEMA17 90 degree…
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
Have you ever experienced the factory Gumotex fin reaching the bottom and hitting rocks? Tearing out the fin holder? If you're backing up and the fin hits a stone, has it already slipped out of place and you've already left it? Is the…
This special scissor for cracking seeds is perfect for kids and anyone who finds it challenging to open seeds! Just place the seed in the scissor’s slot as shown in the image, apply a bit of pressure, and the seed will crack open easily.…
This is a small camera mount for the valve index. Originally designed for a OV2640 with a XIAO ESP32S3 mounted inside of the headset. I run this with project babble. To install this, you need to cut a bit off the plastic on the seam…
Struggling to pinpoint the source of an unpleasant odor near baseboards, ceilings, or other hard-to-reach places? This adapter provides an efficient tool for precisely identifying odor sources. Designed to work with a 3M half-mask 6002PRO…
IMPORTANT: This particular design is sized to fit a compact pistol (Specifically, the Ruger EC9s). If you have a full sized pistol you may need to scale the design up slightly. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
Note :- The Right and Left guides, and Right and Left Caps have been updated. Files ending V1 are updated files. These guides were created to stop the edges of the CR-30 conveyor from curling at the edges mainly when cold, and also to…
This is a stand to hold your Nintendo Wii's sensor bar and motion tracking camera. It has grooves on the back with retaining plugs to tug the cords away. Lay it on it's back when printing and you wouldn't need any support.
Organize your session notes and encounter cards in style with this 3D-printable DM screen card holder! Designed to clip onto most standard DM screens, this holder lets you keep initiative cards, NPC stats, spell reminders, or other…
I recommend you to watch a tutorial video first https://youtu.be/slqCsvnURbI for this project you need this things : Hardware parts: wiper windshield DC motor -12v power supply dpdt switch two limit switch motor speed controller -three…
A simple and versatile two-sided flip token featuring a green checkmark on one side and a red X on the other . Flip it whenever you need to keep track of two states such as ready/used, active/inactive, available/unavailable, yes/no,…
I made this counter to firmly slide over the lid of my water bottle, so I can keep track of how many bottles I drink per Day. There are Magnets in bedded in the print.
Template I created while I designed the mount for a camera onto industrial warehouse racking. The three files are: Dummy warehouse racking to test fit Template mount with 2 rows of 2 pins Template mount with 1 row of 2 pins
These clips suit the RackIT 400kg racking System from bunnings. They're designed to clip to the braces on the vertical stands, found here. The models here are made to fit the cross braces as shown in pictures but for a bit more storage i…
I kickstarted the Hellboy board game and love it! The kickstarter edition came with 7 main characters and, for target priority tracking, came with really cool character busts (instead of just using colored markers)... for 6 of those…
10/28/23 added files for a v2 incorporating use for ACC step beams.
I made these to use in my D&D games to track monster initiatives , there is a hole in front and back for a 6x2 magnet to glue in on the player side and the dm side so you can just add a piece of paper with the monster name or a small stat…
This was made at the request of a friend. Included are his pictures. This was made for the Steam Frame, but for those with face tracking, who are also using the Arcturus Vision, AND a Vive Tracker. Required Parts D-Shaft 1/4" Tripod…
A face tracker mounting clip with an attached mount for a full body tracking system called Fluxpose
For a bit more information, see the thread at https://www.theminiforum.co.uk/forums/topic/360208-the-string-method-3d-printing/ Need a version for the rear, too? Sorry, that one's up to you. Mine hang off a bespoke towbar, so won't help…
This is an alternative gimbal concept for my Sala drone concept.
Index front cover based on the original cover, but with fans mounted on the outside, for when you need space for face tracking inside. I recommend also printing some fan grilles to protect the fans from the cables. I used this one:…
I created this model to mount a 100mm ArUco paper tracking marker to my headphones. The ArUco marker is glued to some a cardboard backing, and then glued to the ‘V’ shaped mounting part. For this, I just used a glue stick. The bottom…
I made these to keep track of my actions when playing a solo game of Arkham Horror.
Protect yourself with this badass desktop laser turret. Hit every Cornea of your enemy thanks to the depth tracking in Kinect. Print instructions Preview: http://youtu.be/5igo\_fVqvLI Working: http://youtu.be/tMSnQYZAMJc Remember to use…
uses 12 x 1.7 mm disk magnets remix of ncsandor's design
The joints parts are made of TPU 95A The mechanism parts are made of PETG All the others are PLA Epoxy adhesive is recommended to attach some of the parts
Overview These are Skådis-compatible backwall panels designed for the Modular Rack System. The panels mount behind the rack structure and add a functional pegboard-style storage surface while maintaining the industrial warehouse look of…
This is a clip-on forklift bumper designed for the Modular Racking System (Model 500909) . Inspired by the real steel bumpers you see at the base of pallet racks in warehouses, this accessory adds both realism and a bit of visual weight…
A simple Y holder for your racking cane that fits in the bung hole. Allows for adjusting the height of the siphoning. Designed for the auto racking cane with a 22mm(7/8") diameter. Also included a 10mm (3/8") siphon hose clip for your…
Pallet racking snips mount needed something for the racking i have so did a thing and here it is. racking as pictured
Tool for drawing pictures from mobile
Designed for use with 16mm curtain rod, the brackets drop right onto your racking shelf unit and you can use the slider models to mount a shelf on top or just use them as I have as two supporting points for whatever you sit on top. The…
Just unscrew the 2 top face plate screws, put the adapter in between and put back the screws. Use supports so you can decide witch orientation you print. Upwards should be used for clean faces taking the adapter. You also could divide the…
Tracking Blocks numberer 1-5 you can print mupituple of these and then use the numbers help you align your scan or just
This is replacement foot for the blue uprights used for Rapid Racking 2 series racking. It can probably be used for other brands which all look the same! I would suggest you assemble the rack first and then add the feet to stop them from…
Foot designed to fit on multiple types of metal racking
just something to hang a clock on boltless shelving specifically rhino racking but should fit others i would reccoment small layer i printed it with 0.08 but its up to you supports are needed no rafts
UPPDATE 09/02/2026: V0.2.1 is out o github, with much simpler pairing workflow. Updated the the instructions pdf is released. I kept forgetting to start and stop phone timers, so I made a cube that sits on the desk. Face pointing up is…
I designed a new full sized upright for the Modular racking system to allow Ikea Skadis accessories to be added to the sides of the rack I decided not to alternate the holes and to include all of them for maximum flexibility on such a…
