Pallet rack Forklift bumper for Modular racking system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on forklift bumper for Modular Racking System. Realistic warehouse-style rack protection.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution
This is a clip-on forklift bumper designed for the Modular Racking System (Model 500909).
Inspired by the real steel bumpers you see at the base of pallet racks in warehouses, this accessory adds both realism and a bit of visual weight to the bottom of your rack setup.
The bumper clips onto the upright and sits at floor level, just like the real-world versions meant to protect racks from forklift impacts.
I printed mine in yellow PLA for that classic industrial safety look using:
0.4mm nozzle
Anycubic Kobra S1
Compatibility
Designed specifically for the Modular Racking System (Model 500909)
Clips onto the rack upright without hardware
Printing Notes
PLA or PETG both work well
No supports required
0.4mm nozzle recommended
3–4 perimeters suggested for durability
Differences from the Original Rack System
Adds a real-world style safety bumper
Purely an accessory (does not modify structural components)
Clip-on design for easy install and removal
☕ Support
If you like this project, toss a coffee my way — it keeps the printer fed with filament and my workshop stocked with nuts and bolts!
https://buymeacoffee.com/jvdesign