Intermediate Tier Kit - Modular Racking System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Introduces a new set of short beams and dividers to separate your shelves into more sections
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 170
- Wydruki
- 1
- Wyświetlenia
- 881
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Accessory for my Modular Racking System
This adds a set of short beams and two variants of uprights to be used in the center. It allows you to divide your sections further for a little more options with storage. The beams must be mounted in the same location on the bottom and top uprights for the full height version to be able to be fastened top and bottom. If you only want to fasten the bottom, your beams can be farther apart.
You can only have beams on one side with these, since they are off-centered (does not matter which). It does, however allow you to use the regular decks and panels, and allows for future accessories to be usable between short and long beams; since all the features align with each other.
To use the rivets instead of m3 bolts:
For fastening the beams to the intermediates, use 8mm
For fastening the intermediates to the beams, use 6mm
NOTE!
Box beams only work with heavy duty decking.