45° Joiner Kit (Short & Long) - Modular racking system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two sets of angled beams to join racking at an angle. The long version is wide enough to fit a spool
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 133
- Wydruki
- 2
- Wyświetlenia
- 538
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Accessory for my Modular Racking System
There is a short and a long set. They join the beams at a 45 degree angle. I chose 45 over 90 due to the length of the outside beam with a straight 90 (It does unfortunately mean needing an extra upright for a corner). I wanted to be able to at least use the long version for something, so I made it wide enough to fit a spool. The gap is just over 80mm wide. The spools do get pretty close to each other when you have two pairs side by side; But it does fit (polymaker & eSun 1KG spools as tested)
The long set also has a panel made to fit the gap, if you wish to store other stuff in the corners.
They mount the same way as the standard beams.
UPDATES
- September 03, 2023
- Added accessory versions of beams (for labels or other beam attachments)
- Removed the old standard beams (to minimize the risks of printing the wrong versions)
- Corrected some model features on all the beams
- Added an instep grid (and a simplified version)
- June 15, 2023
- Updated all the model files to correct positions/angles.
- Added an image of a printed set of long joiners
- Minor details in text