45° Joiner Kit (Short & Long) - Modular racking system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two sets of angled beams to join racking at an angle. The long version is wide enough to fit a spool
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 133
- Makes
- 2
- Views
- 538
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Accessory for my Modular Racking System
There is a short and a long set. They join the beams at a 45 degree angle. I chose 45 over 90 due to the length of the outside beam with a straight 90 (It does unfortunately mean needing an extra upright for a corner). I wanted to be able to at least use the long version for something, so I made it wide enough to fit a spool. The gap is just over 80mm wide. The spools do get pretty close to each other when you have two pairs side by side; But it does fit (polymaker & eSun 1KG spools as tested)
The long set also has a panel made to fit the gap, if you wish to store other stuff in the corners.
They mount the same way as the standard beams.
UPDATES
- September 03, 2023
- Added accessory versions of beams (for labels or other beam attachments)
- Removed the old standard beams (to minimize the risks of printing the wrong versions)
- Corrected some model features on all the beams
- Added an instep grid (and a simplified version)
- June 15, 2023
- Updated all the model files to correct positions/angles.
- Added an image of a printed set of long joiners
- Minor details in text