Turbine Windmill | Double Wind Chime with Bearings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalistic vertical double wind chime rotating in opposite direction. 608 standard bearings or printed bearings.
- Ocena
- 4,333 / 5
- Polubienia
- 515
- Pobrania
- 1299
- Wydruki
- 5
- Wyświetlenia
- 10 438
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Turbine Windmill with Rolling Bearings
V4 Update 2026/06/14: What could be better than a turbine windmill? Two of them on top of each other, running in opposite direction 😁 (print the two 'double' files for that)
V3 Update 2026/06/05: Finally I managed to make all walls of uniform thickness. You never stop learning 😉This fixes a problem that non-arachne slicers left small holes in the outer walls of the turbine blades.
V2 Update 2026/05/28: Rebuilt it for use with standard 608 bearings with snap-fit assembly. Optimized weight, stability. So V2 will turn in a breeze.
Printing
Print in PETG or better for outdoor use / 0.2 layer height / no supports or brim (2 h on my Bambu A1)
Use standard 608 / skate bearings 22x6x7 mm (cheap on amazon & co.) or print your own bearings on printables (for alternatives search for 608 bearing).
Assembly
Snap the bearing onto the turbine wheel. Mount everything on broomstick or slat with M4x60 mm screw (pre-drilling recommended).
Single variant
Double variant
