Domino Set — Double-Six (28 tiles), 2-Colour Engraved (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full double-six domino set: 28 tiles, 36 × 18 × 5.5 mm each, Ø2.4 mm engraved pips + centre line.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Double-six domino set — 28 tiles, two-colour
A complete double-six set: 28 tiles, every face combination from (0-0) up to (6-6), printed flat with engraved pips and centre line.
Tile dimensions
Tile: 36 × 18 × 5.5 mm
Pip: Ø2.4 mm, 0.8 mm deep
Centre line: 0.6 mm wide, 0.8 mm deep
Pip pitch: 4 mm
What's in the bundle
combined.stl — all 28 tiles in a 6×5 layout, encoded as a single ASCII STL with two named solids (
body+pips). Drop into Bambu Studio → Import → right-click → Split to Parts for automatic two-colour assignment. This is the print-ready primary.body.stl — all 28 tile bodies in the same layout (filament A).
pips.stl — all 28 pip + line plugs in the same layout (filament B).
domino_set.scad — parametric source. Single-tile mode via
-D 'part="single_body"' -D 'left=N' -D 'right=M'lets you reprint any face. All dimensions parameterised at the top of the file.
Layer height: 0.2 mm.
Walls: 3.
Infill: 15 % (tiles are thin; infill barely matters).
Supports: none — tiles are flat slabs, pips are recessed.
Orientation: Auto-orient in Bambu Studio picks the flat layout correctly. Layout is ~231 × 102 mm so it fits the A1 mini bed.
Print time: ~2.5 h on Bambu A1 / X1C at 0.2 mm.
Material
PLA is fine. The accent (pips) is a few grams of contrasting filament — gold-on-black or white-on-blue both look great.
License
CC BY — fork it, scale it, share what you make.
