1 / 6
Domino Set — Double-Six (28 tiles), 2-Colour Engraved (OpenSCAD) — image 1
1 / 6

Domino Set — Double-Six (28 tiles), 2-Colour Engraved (OpenSCAD)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Full double-six domino set: 28 tiles, 36 × 18 × 5.5 mm each, Ø2.4 mm engraved pips + centre line.

Rating
0 / 5
Likes
4
Downloads
12
Makes
0
Views
50
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution

Double-six domino set — 28 tiles, two-colour

A complete double-six set: 28 tiles, every face combination from (0-0) up to (6-6), printed flat with engraved pips and centre line.

Tile dimensions

  • Tile: 36 × 18 × 5.5 mm

  • Pip: Ø2.4 mm, 0.8 mm deep

  • Centre line: 0.6 mm wide, 0.8 mm deep

  • Pip pitch: 4 mm

What's in the bundle

  • combined.stl — all 28 tiles in a 6×5 layout, encoded as a single ASCII STL with two named solids (body + pips). Drop into Bambu Studio → Import → right-click → Split to Parts for automatic two-colour assignment. This is the print-ready primary.

  • body.stl — all 28 tile bodies in the same layout (filament A).

  • pips.stl — all 28 pip + line plugs in the same layout (filament B).

  • domino_set.scad — parametric source. Single-tile mode via -D 'part="single_body"' -D 'left=N' -D 'right=M' lets you reprint any face. All dimensions parameterised at the top of the file.

Print

  • Layer height: 0.2 mm.

  • Walls: 3.

  • Infill: 15 % (tiles are thin; infill barely matters).

  • Supports: none — tiles are flat slabs, pips are recessed.

  • Orientation: Auto-orient in Bambu Studio picks the flat layout correctly. Layout is ~231 × 102 mm so it fits the A1 mini bed.

  • Print time: ~2.5 h on Bambu A1 / X1C at 0.2 mm.

Material

PLA is fine. The accent (pips) is a few grams of contrasting filament — gold-on-black or white-on-blue both look great.

License

CC BY — fork it, scale it, share what you make.

Tags