P
PrintablesBudwin
Red Hood Domino Inspired Mask Pack
Red Hood Domino Inspired Mask Pack Enjoy Category: 3D Printing
- Downloads
- 1,278
- Likes
- 224
- Rating
- 5
Search results: domino
520 models
P
Printablespaulengel
Festool Reduced Size Dominos for Dry Fit (4mm, 5mm, 6mm, 8mm, 10mm)
When I need a bunch of Dominos for repeated dry fits to dial in my parts's sizes, I typically sand down standard wooden Dominos. By printing these I get the advantage of a lower price, less of my time spent preparing and marking them, and…
- Downloads
- 1,121
- Likes
- 129
- Rating
- 5
P
Printablessthone
Mexican Train Domino Hub
Hub for playing Mexican Train Dominos. I tried a few other hubs on Thingiverse but they didn't fit my Dominos so designed this quick one. You can use bybinhabr's Little Trains printed at 85% with this hub. Category: Games
- Downloads
- 972
- Likes
- 85
- Rating
- 4.86
P
Printablesmilano
Domino Train
It's a small piece, so you'll need a small nozzle. I printed with a 0.2mm nozzle and used a raft. Can definitely be printed with 0.4mm and small layer heights. No additional supports needed This can be printed with 0% infill, but I found…
- Downloads
- 951
- Likes
- 82
- Rating
- 4.92
P
Printables3DDIY
Festool Domino offset Marking Gauge
This jig helps mark the offset for both the Domino 500 and 700. This helps with aligning the domino to bore the hole center of your mark on face frames. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
- Downloads
- 926
- Likes
- 198
- Rating
- 5
P
PrintablesThomas H 3D
Kingdomino Castle
A Kingdomino castle that fits in the box. Wall thickness optimized for 0.4 nozzles. No supports is required. Support / Reseller If you want to support me or sell my models, take a look at my Patreon: https://www.patreon.com/thomash3d You…
- Downloads
- 918
- Likes
- 95
- Rating
- 5
P
PrintablesEclsnowman
Mexican Train Dominos
A coworker mentioned he had some broken and lost pieces to his Mexican Train dominos set. He asked if I could print him replacements and add a little accent train track around the center. Hopefully if you have one of these sets and pieces…
- Downloads
- 879
- Likes
- 98
- Rating
- 5
P
PrintablesBudwin
Green Lantern Kyle Rayner Inspired Domino Mask Pack
Green Lantern Kyle Rayner Inspired Domino Mask Pack Made 2 versions then mixed the two together. Enjoy Category: 3D Printing
- Downloads
- 845
- Likes
- 111
- Rating
- 5
P
PrintablesSteve Rowe
Festool Domino Glue Nozzles
These prints are glue nozzles for the Festool Domino sizes 5, 6, 8, and 10mm. Also included are a flushing adapter to clean the nozzles and a storage tray. The glue nozzle threads are sized to fit a Titebond 16 oz. glue bottle. The…
- Downloads
- 828
- Likes
- 164
- Rating
- 4.33
P
PrintablesSpradlinb
Mexican Domino Train Hub and Case
This set of pieces holds together eight trains and a two-piece train hub with a large domino shaped case. This makes a compact set that can be carried with your dominoes! This was sized to fit standard domino pieces. All files can be…
- Downloads
- 760
- Likes
- 96
- Rating
- 5
P
Printablesharpman62
Domino Holder
Domino holder that holds standard and professional dominoes.
- Downloads
- 704
- Likes
- 67
- Rating
- 5
P
PrintablesBakafish
Festool Domino Metric and Nominal Presetter
This is a model for a replacement part for the Festool Domino floating tenon tool that has presets that are more compatible with the common plywood thicknesses. The ½", 5/8" and ¾" nominal plywood thicknesses are actually typically…
- Downloads
- 677
- Likes
- 71
- Rating
- 5
P
PrintablesSrutgers
Festool Domino Glue Spreader
Filling lot's of mortises with wood glue before a glue-up is slow and tedious. These caps screw on to most PET bottles and make glue filling mortises for Festool Domino's a lot easier and faster. I use it only with white or yellow PVA…
- Downloads
- 671
- Likes
- 173
- Rating
- 5
P
Printablesfaultedlogic
Mexican Train Dominos Engine
This is a replacement engine for the popular Dominos game “Mexican Train”. My wife wasn't happy with the injection molded engines that came with the set she bought, so I modeled this engine to replace those tiny, poorly made pieces. I…
- Downloads
- 626
- Likes
- 71
- Rating
- 4.8
P
PrintablesPixelPrints
MEXICAN TRAIN TRAY / DOMINO TRAY
Its really handy as where the people you are playing with wont see what you have and its easier to manage! It can hold up to 20-22 pieces! 3D PRINTING SETTINGS Slicer : Prusa Slicer or Cura Layer Height : 0.2mm First Layer Height : 0.24mm…
- Downloads
- 624
- Likes
- 71
- Rating
- 5
P
PrintablesTriple G Workshop
🂋 Travel Dominos 9x9 Set 1 Color Change
I'm printing this soon and will add more pictures. ------ The 9x9 remix of my travel set!! Goes on a string or shoelace to put in any pocket or bag! 1 color change included.
- Downloads
- 620
- Likes
- 156
- Rating
- 5
P
PrintablesTache
Festool Domino CAMLOCK Adapter
This is an adapter for the Festool Domino Joiner (DF 500). It uses the CAMLOCK connector by @PeterH . Related: Festool Domino Cutter Rugged Case https://www.printables.com/model/710716-festool-domino-cutter-rugged-case CAMLOCK Adaptors…
- Downloads
- 619
- Likes
- 92
- Rating
- 5
P
PrintablesJuanma
Domino Sensorial
This is a new version of Domino for people with reduced vision or blind. Everybody can have fun! 28 pieces Box Print instructions Nozzle 0.4 / 0.6 Infill From 10% to 100% Layer height From 0.1 to 0.4mm Other No need for raft or so. I…
- Downloads
- 618
- Likes
- 178
- Rating
- 5
P
Printablesfunction.3d
Clasic Domino Set
Print with the numbers facing down, make the color change on layer 7. This was my inspiration for the design: https://www.printables.com/es/model/356497-domino-set
- Downloads
- 609
- Likes
- 86
- Rating
- 5
P
Printablescrashkg
Festool Track Mount for Domino XL and 500
Print this with with the base flat to the print bed. You need supports just for the 2 ledges that insert into the track. I just painted them on and they come right off after the print is done. You attach the mount to the base of the…
- Downloads
- 566
- Likes
- 105
- Rating
- 5
P
PrintablesTache
Festool Domino Cutter Rugged Cases
These are cute little boxes for the Festool Domino DF500 and DF700 cutters and wrenches. They are remixed from the awesome Rugged Box (Parametric) designed by Whity . Update 2024.10.30: Added 3 mm and 4 mm wrench slot options for the…
- Downloads
- 543
- Likes
- 130
- Rating
- 5
P
PrintablesJerrari
Domino Tray Holder
Domino Tray Holder Are you tired of this happening? [insert image of your dominoes falling over and friends laughing at you] Don't let this be you, you need DOMINO TRAY HOLDER! Holds dominoes up to 7/16" or 11.15mm thick PRINT…
- Downloads
- 535
- Likes
- 105
- Rating
- 5
P
PrintablesJack's Cool Designs
Festool Domino Micro Systainer Bit Case
I sell this as a complete product here: https://www.etsy.com/listing/1507979093/festool-domino-micro-systainer-bit-case Protect your investment in Festool Domino bits with this carrying case. This case carries seven bits, along with the…
- Downloads
- 518
- Likes
- 127
- Rating
- 4.25
P
PrintablesIdea2Item
Festool Domino Thin Stock Jig for DF500
Achieve precise mortise centering on 12mm stock instead of the lowest 16mm setting the tool offers out of the box with this custom jig designed for the Festool Domino DF500. Perfect for non-structural projects, small boxes, and other fine…
- Downloads
- 509
- Likes
- 96
- Rating
- 4
P
PrintablesSteve Rowe
Festool Domino Glue Nozzles for Model 700 and 500
This update is a new design from my original glue nozzles and include the following improvements: Split design separating the nozzle from the cap and permitting replacement of just the nozzle (or cap) if necessary. Added nozzle sizes…
- Downloads
- 456
- Likes
- 92
- Rating
- 5
P
Printableselement54
Sasquatch - Base Support for Festool Domino DF 500
Sasquatch - Base Support for Festool Domino DF 500 Extended base support for the Festool Domino DF 500 inspired by TSO DBF-45 BigFoot v2.0 When using the Domino on flat surfaces I wasn't happy with the handling. Instead of using the…
- Downloads
- 455
- Likes
- 70
- Rating
- 4.6
P
PrintablesTriple G Workshop
Domino / Tile / Rummikub Rack Scalable 🁴
100% scale pictured below, good for scrabble and rummikub
- Downloads
- 433
- Likes
- 81
- Rating
- 4.83
P
PrintablesCyber Man
Festool Domino DF500 Adapter für Führungsschiene
Die Drehgriffe findet Ihr hier: https://www.printables.com/de/model/502882-sterngriff-knauf
- Downloads
- 405
- Likes
- 98
- Rating
- 5
P
PrintablesSitoko
Festool Domino Rail Adapter
You will need two m5 screws ~12-16mm long to attach it. Print in PETG and with as many walls to make the narrow part solid. I sold these parts on Amazon but I don't want to support them anymore. Commercial use is not allowed without…
- Downloads
- 361
- Likes
- 63
- Rating
- 5
P
PrintablesNunya Bidness
Festool Domino Dry Fits
This is a set of Dominoes for use with the Festool Domino. If you know, you know… DF500-relevant standard sizes are included. Here is a link to the OnShape file if that's your thing. Use Precise Wall and Z-Height for accurate fit.…
- Downloads
- 357
- Likes
- 38
- Rating
- 5
P
PrintablesHodi
Domino router jig
Inspired by the design of JSK-Studio ( https://www.youtube.com/watch?v=NX5H3UaoFl0 ) I modeled a custom version from scratch with bearing on the Z Axis aswell. What you need aside from the prints: 2x 116mm 8mm Rod 2x 114mm 8mm Rod 2x…
- Downloads
- 356
- Likes
- 114
- Rating
- 5
P
PrintablesCharlie W
Festool Domino DF 500 & DF 700 XL Glue Nozzles for Titebond Bottle
I designed these based off of the @SteveRowe_181180 version with a much different approach to swapping the nozzles out. The nozzles are inserted through the cap like how a baby bottle works. I printed the cap(s) in PETG upside down and…
- Downloads
- 352
- Likes
- 56
- Rating
- 5
P
PrintablesCharles C.
Full View Domino Tray
Hello Makers! New maker here with about 2 months under my plastic belt. This is my first original design created because I wanted to see all my dominos when playing Mexican Train and I could find nothing I liked. My favorite train dominos…
- Downloads
- 337
- Likes
- 31
- Rating
- 5
P
PrintablesJobla
Domino tiles puzzle - Multiplication tables
Multiplication tables as Domino tiles puzzle. Every tile is broken into 2 pieces. Find the right answer for each multiplication and check if the tiles fit together. A storage box for 10 tiles is also available. Print instructions…
- Downloads
- 309
- Likes
- 93
- Rating
- 5
P
Printablesdaandruff
Domino Set
You can print as is or use material changes throughout to add some contrast to it. I used a silver-like PLA for the first and last three layers of the pieces. The box-lid should be printed upside down to avoid any supports.
- Downloads
- 305
- Likes
- 63
- Rating
- 5
P
PrintablesSebastianDruckt
Variable Festool Domino Dowel Jig for Hand Routers
This is a Jig inspired by “Der Holzbastler” to use Domino Dowels without spending a thousand bucks for the Festool machine. The mechanism is perfect for dowels with 22,1 mm width and different thicknesses (at least 6 and 8 mm). I now…
- Downloads
- 302
- Likes
- 118
- Rating
- 4
P
Printablesprint3Dtv
Print2Play: Domino Set with Storage Box
Print2Play: Domino Set with Storage Box Description: This Domino Set includes 28 printed tiles, a storage box, and a matching lid. It’s designed to be a practical, fun, and fully 3D-printable set for playing dominoes. The set can be used…
- Downloads
- 294
- Likes
- 31
- Rating
- 4
P
PrintablesDan_Mc
Festool Domino Glue Nozzle
I found a nice Domino glue applicator on Printables, but it didn't leave a glue surface that I was hoping to have, so I decided to work up a version that left more glue in the mortise. It works pretty well adding a bit of glue to the…
- Downloads
- 294
- Likes
- 82
- Rating
- 5
P
PrintablesBombastus Hands
Dom Foot - workshop jig to hold Festool Domino parts
This is the Dom Foot , a little helper for your workshop. If you have a Festool Domino joiner DF500 or maybe even DF700 this might come in handy. Depending on the project you might need to oil or paint pieces before glueing them together.…
- Downloads
- 294
- Likes
- 46
- Rating
- 0
P
PrintablesTriple G Workshop
🂋 Travel Dominos 🁴
For this look start with white . Use a shoe-string or yarn to loop it and tie a bow. Quick Guide to changing filament~ Have some paper to push away extruded filament. That's why I always set up the models on the left. When the MK3 jogs…
- Downloads
- 279
- Likes
- 81
- Rating
- 5
P
PrintablesJuanma
Sensorial Domino
This is a new version of Domino. It's very helpfull for people with reduced vision or blind. Everybody can have fun! You can play following the shapes or just count the lines. The “S” is 1. The “circles” are 2. The “triangle” is 3.. and…
- Downloads
- 277
- Likes
- 73
- Rating
- 5
P
Printablesnightfox90
Mexican Train Dominoes Game Hub
This is a center hub piece for the Mexican Train Dominoes game. It has 8 slots for building track off and the center holder for the starting number domino. It is for dominoes that are 1x2 with filleted corners and ¼ inch thick, but it…
- Downloads
- 274
- Likes
- 14
- Rating
- 5
P
Printablessquinn
Domino Tray Holder
A simple and helpful tray design that will accommodate dominoes of various sizes. With just a glance you can quickly assess your whole array of options, and then make the perfect play as you're challenging others in a game of dominoes.
- Downloads
- 268
- Likes
- 59
- Rating
- 5
P
Printablessifi
Mexican Train Domino Stand
What is it? My family enjoys playing dominos, but when we set our dominos out they are hard to see and keep falling down. How to use it This stand is designed to be stackable and can hold up to 18 dominos. Print instructions Any Infill.…
- Downloads
- 265
- Likes
- 33
- Rating
- 0
P
PrintablesFra3D.11
TADC themed chess, chekers, tic tac toe and domino set
This space isn't enough for all the things i need to say, that's why i uploaded a pdf with the full description, go to “other files” then download the “FULL DESCRIPTION” .pdf Made with both Nomad Sculpt and Tinkercad, and all the effort…
- Downloads
- 262
- Likes
- 56
- Rating
- 0
P
PrintablesW4ve
Festool Domino DF500 Dust Extractor Cam Lock Adapter
Festool Domino DF500 Dust Extractor Cam Lock Adapter with Twist Lock 25 degree angle allows extractor host to be offset Printed in PETG @ 0.3mm
- Downloads
- 247
- Likes
- 26
- Rating
- 5
P
PrintablesMatt
Dominos 0 to 9 set (complete set, 55 in total)
Family fun, especially with the bigger 1..9 range. I printed them in PLA white on black using a Bambu X1 Carbon and an AMS although you can pause the print and swap out the filament if your printer does not support multi material…
- Downloads
- 227
- Likes
- 19
- Rating
- 0
P
Printablesmm404
Domino / Mexican Train Rack
Another option for Mexican Train / Dominos rack. This one fits 20 tiles. Other players will not be able to tell how many tiles you have left - so keep that in mind when deciding if this fits your game rules.
- Downloads
- 226
- Likes
- 24
- Rating
- 0
P
PrintablesDryfiredude
Individual Double 12 Dominos
The original file had a few dominos that were duplicates so this one has all the correct files and they are individual so that you can print them however you want, at whatever scale you want. Dominos in photo were printed in white and…
- Downloads
- 212
- Likes
- 23
- Rating
- 0
P
Printablesgwendal
Festool Domino DF500 MFT3 dock
Dock for holding the DF500 up, to the MFT3 table aluminium profile. Slide the dock then use 2 T-Nut from the festool@ mft accessories, 2 m5 nuts and 5x20mm bolts to hold the dock to the MFT table rail. The DF500 slides and is held tight…
- Downloads
- 211
- Likes
- 44
- Rating
- 5
P
PrintablesMichaelR
Festool Domino DF500 Dock
Dock for your Festool DF500 Domino. Allows you to have both hands free for cutting mortises in smaller work peices.
- Downloads
- 210
- Likes
- 25
- Rating
- 0
P
PrintablesRyan Olson
Domino Rack and Rack Holder
This model is a rack to hold your dominos when playing. There is also a rack holder to store up to 12 domino racks
- Downloads
- 192
- Likes
- 25
- Rating
- 5
P
PrintablesOrion4o4
Dominoes Game
In case you're wondering, the dominoes have rounded edges on all sides, but have no issue standing upright. The dimples for the numbers are rounded on the bottom too! A word of caution, I included a design for a storage/travel case, but…
- Downloads
- 191
- Likes
- 41
- Rating
- 0
P
PrintablesHyness._.
Domino for toppling (H5 Dimensions)
Basic domino. I printed With PLA.
- Downloads
- 188
- Likes
- 26
- Rating
- 5
P
PrintablesA2S_dESIGN
Classic dominoes
The classic game of dominoes. Board game that is played with 28 rectangular tiles that are placed in turns according to certain rules and in which the winner is whoever places all their tiles first or whoever has the fewest points on them…
- Downloads
- 186
- Likes
- 45
- Rating
- 0
P
PrintablesGlennovitS 3D
Dual Color Domino (2 part single extruder multicolor game)
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
- Downloads
- 181
- Likes
- 121
- Rating
- 0
P
PrintablesMakak007
DOMINO (big set of 0-0 to 9-9, 55 pcs)
Here comes another little weapon against Covid19 lockdown boredom :-) These are DOMINO bricks, big set of 0-0 to 9-9, altogether 55pcs. Printed from PRUSAMENT PLA (Vanilla White, Lipstick Red and Pearl Mouse) The models are scaled up to…
- Downloads
- 168
- Likes
- 20
- Rating
- 0
P
PrintablesJulius3E8
Kingdomino Castle Kit Card
This a 3D-ish replacement/substitution castle for Kingdomino (a fun little table top card game). After assembly, you can fit both king tokens inside (just like the originals). There's also a 40x40mm base tile that the castle seats into.…
- Downloads
- 165
- Likes
- 71
- Rating
- 4.67
P
PrintablesAtelier Lafayette
UPGRADED ANGLE PLATE FOR DOMINO DF500/DF700
This upgraded angle plate for the Festool Domino DF500 or DF 700 provides a better stability and rigidity than the factory version. The file JOINT can be printed in TPU to hold the 2 M5 screws. Category: Parts
- Downloads
- 164
- Likes
- 35
- Rating
- 0
P
PrintablesTreoWayne
Festool Domino DF500 DF 500 plunge depth limiter
The minimum plunge depth of the Festool Domino DF500 joining machine is 12mm when using any Domino size other than 4mm. When joining material to the face of 12mm plywood a plunge depth of less than 12mm is desired. This attachment for the…
- Downloads
- 155
- Likes
- 20
- Rating
- 0
P
PrintablesnoLieBowtie
Domino Holder
This domino holder was made to be the largest it could be while still fitting on the Bambu Carbon print bed. The tracks that hold the dominos are different sizes to account for cheap, poorly manufactured dominos that vary in sizes. These…
- Downloads
- 155
- Likes
- 8
- Rating
- 5
P
PrintablesMike
Chromino Domino Stand
My 7 years old daughter designed and print her first model using Thinkercad this weekend. She wanted a stand for when sh
- Downloads
- 151
- Likes
- 9
- Rating
- 5
P
PrintablesTitafubaki
Christmas Pyramid Candle Carousel - Mexican Train Dominos
Christmas Pyramid Candle Carousel
- Downloads
- 150
- Likes
- 10
- Rating
- 0
P
PrintablesMamba
Domino Stand
Use this domino stand in your next game to keep your dominos organized!
- Downloads
- 146
- Likes
- 7
- Rating
- 5
P
PrintablesJulius3E8
Single Print Kingdomino Castle
Replacement or substitution castle for Kingdomino table top card game. Can place both tokens inside. Single print.. no support necessary. If you're looking for reprints of the little King tokens, go here:…
- Downloads
- 146
- Likes
- 26
- Rating
- 5
P
PrintablesKatfish Heavy Industries
Dominos - Double Nine Set
Domino sets include a Double-Six & double-Nine Domino Set. Holders designed for 6 Dominoes and include vertical and angled versions.
- Downloads
- 146
- Likes
- 9
- Rating
- 0
P
PrintablesSavageRodent
Domino Cookie Cutter
If you like clarting about this is for you! Why not make your own edible set of dominoes. NEW! I've now created a refined version of this design, which you might also like to check out: Domino Cookie Cutter 2 Thing Files Include: Number…
- Downloads
- 140
- Likes
- 52
- Rating
- 5
P
PrintablesChubbyEwok
Mexican Train Dominos: Train Pieces + Magnetic Case
This magnetic case can accommodate 8 player trains and 3 Mexican trains. Magnets needed: -8 pieces 6x2mm magnets, pressed into the case recesses. Files included: -Case bottom and top -Mexican train with sombrero -player train -.STEP file…
- Downloads
- 138
- Likes
- 18
- Rating
- 0
P
Printablesdhiertz
domino cookie cutters
domino cookie cutters height outside 15mm height inside 11,5mm Just have a look to the other cookie cutters I create: https://www.printables.com/social/180133-dhiertz/collections/376620 Have fun!
- Downloads
- 136
- Likes
- 46
- Rating
- 0
P
Printablesmaxluzi
Festool Domino DF500 Glue Spreader
Another glue spreader for the festool Domino DF500. I Made it to suit to our glue bottles from Ponal. Using this glue spreader only makes sense if you do bigger glue ups… for one or two domninos, the cleaning afford is to much…. With a…
- Downloads
- 131
- Likes
- 33
- Rating
- 0
P
PrintablesKniRider
Dominoes with Inserts
Thanx to rkxone for the initial Dominoes set! - https://www.thingiverse.com/rkxone/designs Dominoes with Inserts I remixed this just for some fun and because I can't paint, I don't have a multi-color printer, and I thought it looked…
- Downloads
- 130
- Likes
- 20
- Rating
- 0
P
PrintablesOak Park Creation Lab
Domino Stand - hexxed out with 7 slots
Domino holder with hex pattern. Fits 7 standing up.
- Downloads
- 130
- Likes
- 15
- Rating
- 5
P
PrintablesnoLieBowtie
Center Domino Holder for Mexican Train
I despise the cheap, warped, injection molded centerpiece that came with our box for Mexican Train, so I decided to make my own. There is one center slot for a double-number domino of your choosing, and 16 slots on the perimeter. With one…
- Downloads
- 128
- Likes
- 14
- Rating
- 0
P
PrintablesGhislain
Mexican Train Curved Domino and Card Holder
Description Digital File to DIY 3D print an Domino or Card Holder. Can hold Six/Seven Mexican Train Domino. Added Slot can be use for Playing Card. See second image for dimensions. STL, 3MF, Gcode and F3D(fusion360) files provided. Print…
- Downloads
- 127
- Likes
- 14
- Rating
- 0
P
PrintablesDIY Machines
DIY A Programmable Automatic Domino Layer - Arduino & Bluetooth
How to 3D print and assemble your very own programmable and remote controllable automatic domino laying machine. Who likes knocking down absurdly long runs of dominoes? I do. Who doesn't like laying them all by hand. I don't. That's why I…
- Downloads
- 124
- Likes
- 74
- Rating
- 3
P
Printablesawelshman
dominoes with box
I originally posted https://www.thingiverse.com/thing:4839098 but was never happy with it. i re-designed the box and sliding lid so its now a bit smaller i corrected the spelling (dominos to dominoes ), also the tile dots are now in the…
- Downloads
- 124
- Likes
- 15
- Rating
- 0
P
PrintablesZ3R0X
Festool Domino - F32 Osvac
Created a sturdy osVAC adapter for the Festool domino. Found some other models but they weren't sturdy enough in my opinion or were just too easy to twist off. Print settings : PETG Support Walls: 3 Infill pattern: Gyroid Infill: 15%
- Downloads
- 122
- Likes
- 7
- Rating
- 5
P
PrintablesCrafter64
Mexican Train Dominoes Center piece
Centerpiece for Mexican Train Dominoes. fits a domino that is 1" x 2" -1 model is the regular size -2 model is smaller and can be printed in about 70% of the time with 50% of the material. Print Settings Printer Brand: Creality Printer:…
- Downloads
- 117
- Likes
- 10
- Rating
- 4
P
PrintablesNunya Bidness
Festool Domino Centre Finder
It isn't every day that you need to find the centre of a Domino mortise, but when you do… these will help. Designed to work with the Dry Fit Dominoes , sizes 4 through 10 mm.
- Downloads
- 116
- Likes
- 29
- Rating
- 5
P
Printablesspool2kool
crap load of dominos! (up to double 25!) mex train
mega domino set! double 25! and a box ( https://www.prusaprinters.org/prints/120309-vase-mode-playing-card-box ). Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2mm Infill: 10+ Filament: gst3d…
- Downloads
- 111
- Likes
- 8
- Rating
- 4
P
PrintablesBrknArrw
Mexican Train Dominos Tray
My family loves to play Mexican Train Dominos, especially during the holidays. We have 4 long, skinny trays that are the preferred trays. The tray has 3 rows that hold 5 dominos horizontally each. We have not been able to find the same…
- Downloads
- 108
- Likes
- 17
- Rating
- 5
P
PrintablesKagarov
3Domino - game for 2-5 players
The game involves 21 chips (with numbers from 0 to 5) or 28 (from 0 to 6) or more. Game rules ( first version) The players take out five chips from an opaque bag or box and lay them out in front of them without showing the opponent. The…
- Downloads
- 107
- Likes
- 47
- Rating
- 0
P
PrintablesAlex Vikingo
Dominos and Storage box, Step File
Step file, maybe when i have time, i will upload printing file for orca slicer.
- Downloads
- 106
- Likes
- 15
- Rating
- 0
P
PrintablesDesign Elevator
Learn numbers with dominoes
Homeschooling can sometimes be difficult and we parents have to be creative on how we can teach our kids. We have created this model as a tool to introduce our child to numbers. The first play might be difficult for them but as soon as…
- Downloads
- 106
- Likes
- 31
- Rating
- 5
P
PrintablesSuper 25
Castle for game Kingdomino
Cute 3D model for game Kingdomino
- Downloads
- 103
- Likes
- 14
- Rating
- 5
P
PrintablesMonkeys3DP
Domino throttle cover
Cover for Domino Quick action throttles like those found on GasGas motorcycles Print with supports from build plate Can print in your desired material Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter…
- Downloads
- 102
- Likes
- 7
- Rating
- 5
P
PrintablesFestool
Festool Domino piggy bank
Festool Domino piggy bank - for your next Festool tool! How do you currently safe money for your Festool tool? Print your own Domino piggy bank and save money for your next Festool tool. Don't have a Festool tool yet? Click here Festool…
- Downloads
- 101
- Likes
- 11
- Rating
- 5
P
PrintablesValhalla
Mexican Train Dominos - Center Domino Holder
This is my first 3D model and it took my longer than I would care to admit. But I wanted a Mexican Train center piece that had a spot for the actual trains when not in use during that round. Also I never need 8 spots, so I made this one…
- Downloads
- 101
- Likes
- 13
- Rating
- 0
P
PrintablesRichie Rich
Mexican Train Game complete with Box, 91 dominos Station and domino Stands
If you like the game, this is complete, everything you need is here including a nice storage box, 91 Domino's, station and domino stand… all fits in box…. SCORE SHEET INCLUDED Printing is long, on a Bambu printer all piece take a total of…
- Downloads
- 101
- Likes
- 12
- Rating
- 0
P
PrintablesMrDaedalus
Dominos Mexican Train hub
My kids broke the one that came with our set. Much better to design and reprint instead of gluing the broken one.
- Downloads
- 101
- Likes
- 8
- Rating
- 5
P
PrintablesGN500
Printables Dominos Double 6 Set
For best results when making a domino setup, use 100% infill to make the dominos heavier. If just using them to play a game, 10-15% infill is fine. If printing in a single color, you can paint the recessed areas. You can also print in…
- Downloads
- 100
- Likes
- 15
- Rating
- 0
P
PrintablesTaylor
Mexican Train (dominos game)
I dont have a train uploaded here. I think I used this one: https://www.printables.com/model/613817-mexican-train-dominos-engine
- Downloads
- 97
- Likes
- 5
- Rating
- 0
P
PrintablestheSecond55
Box for Travel Dominos
Loved Triple G Workshop's Travel Dominos but struggled with the string...
- Downloads
- 97
- Likes
- 13
- Rating
- 0
P
PrintablesJordan Powers
Interlocking Domino Plates for Shaper Origin
Overview Dovetail Shaper Plates are interlocking flat plates with embedded Shaper dominoes, designed for use with the Shaper Origin . They can be used to set up custom jigs and workspaces for cutting smaller parts without the need for…
- Downloads
- 96
- Likes
- 25
- Rating
- 5
P
PrintablesStenly_G
Domino Set with Storage Box
Elevate your game nights with this Premium Domino Set , meticulously designed for 3D printing enthusiasts. This model combines the timeless appeal of the classic game with a sleek, modern aesthetic and a custom-fitted storage solution.…
- Downloads
- 95
- Likes
- 36
- Rating
- 0
P
Printableschochi3D
Domino's Pizza Logo (1996)
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. I also added two holes of approximately 11mm by 1mm on the base so you can attach a neodymium magnets.…
- Downloads
- 94
- Likes
- 16
- Rating
- 5
P
PrintablesTerence - AMakerDad.com
Festool Domino MFT Fixture
These 3D printed fixtures allow for the mounting of a Festool Domino DF500 floating tenon joint cutter to a Festool MFT table or similar table with 20mm diameter bench dog holes on a 96mm x 96mm grid spacing. A stepped block is also…
- Downloads
- 93
- Likes
- 36
- Rating
- 5
P
Printablesdavejenej
Kingdomino dispenser tower / Dávkovací věž Kingdomino kartiček
Card holder/dispenser tower for the Kingdomino board game. Optimized for print with Prusa Mini+. Držák kartiček/dávkovací věž pro stolní hru Kingdomino. Optimalizováno pro tisk na Prusa Mini+. Remix from…
- Downloads
- 93
- Likes
- 13
- Rating
- 5