Festool Domino MFT Fixture
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This fixture mounts a Festool Domino to an MFT table to allow accurate and repeatable floating tenon joints
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 93
- Makes
- 0
- Views
- 1,751
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
These 3D printed fixtures allow for the mounting of a Festool Domino DF500 floating tenon joint cutter to a Festool MFT table or similar table with 20mm diameter bench dog holes on a 96mm x 96mm grid spacing. A stepped block is also provided to stabilize the setup and a V-block pattern is cut onto the side of one of the fixture blocks to allow for height adjustment of the Domino DF500 jointer in 2mm increments.
I developed this to cut dominos for drawer slides.
Recommended print settings: PLA, 5 or more perimeters, 25% rectilinear infill.
Original CAD in OnShape here.
Follow me on Youtube for more 3D printed tooling and fixtures:
www.youtube.com/@amakerdad