1 / 5
Corner protection of sheet metal and plastic board objects
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner protection of sheet metal and plastic board objects
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Everyone knows about table corner protectors. But I created a corner protector for thin plate objects. I specifically needed something that would protect the cover sheet when covering the sharp edges of a plate grill. These simple protectors are placed on the sheet and create a curve on the sharp edges. They don't have to be used only on the grill, but will work on any corner of a sheet of plastic, etc. The groove is 1.6mm wide
You can print from ordinary PLA at the default settings. There are no special requirements.