Stubby aerial blank-off cap - Suzuki Swift
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stubby replacement cap for OEM aeria (non-functional replacement)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I don't use my radio and didn't like the long aerial so made this to cap it off. Just note that this won't function as an actual antenna.
A basic design although my print could have used smaller layers at the top to get a smoother finish.
Installation
Unscrew existing aerial
Screw this one in
Print Settings
Material: Something UV safe, ABS, ASA etc.
Wall Loops: Enough to make the outer ring solid or even max out for 100% infill
Layer-height: 0.12 or 0.16 - As low as you can go for accuracy on the thread and a smooth cap
Supports: None
Infill: 100% or max out wall loops
The Fusion 360 model is included with most measurements defined as parameters if you'd like to tweak it.
Any feedback welcome.