Stark varg charger box mod cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stark varg charger box apache/tectake/pelican mod compartement and cover.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After removing the charger from the stand, I installed it an apache box,
Here is te reference on TecTake European shop branding but exact same size that Apache (L):
https://www.tectake.nl/universele-camerakoffer-402871
It is printed in 2 parts and then connected with a rivet or M3 nut+bolt.
Overall it enable to make the box cleaner, and avoid to pull the cable from their plugs.
Sharing here, to inspire other or directly reuse.
Note: cover is based on charger placed being 13mm from the left and centered between top and front.
f3d + step files are available in case you want to customize for your specific box or charger placement.
easy to print in PETG (temperature can be high close to charger) with default printing parameter.