AA Battery Dispenser Honeycomb walls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AA Battery Dispenser with honeycomb walls for better visibility
- Ocena
- 0 / 5
- Polubienia
- 82
- Pobrania
- 177
- Wydruki
- 0
- Wyświetlenia
- 786
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Instructions:
[3mf file]
1.) Upload the 3mf file as "Import 3d models only" as the connectors were added via PrusaSlicer.
2.) Print
3.) Align the connectors and firmly but gently, and carefully insert it into the holes (its snap fit)
[stl file]
1.) Upload the file to your slicer
2.) Print
3.) Align the connectors and firmly but gently, and carefully insert it into the holes (its snap fit, however you have to bend the connectors a little bit so that it fits through the hole, after which just push it inside, after you push it for enough, it will lock)
Try the AAA version!
[Update 5/20/2026]
I added custom snap fit joints, because the connector holes seem to not work with easyprint, this version can be found in the files alongside the old one
If you have any feedback, please let me know!
[Notes]
The grey one is via 3mf, and the black one is the new STL file.
[DISCLAIMER]
The text on the photo is not in the file, I added it myself via PrusaSlicer's text modifier, however, you can download the STL file and add your custom text and custom connectors (if you chose the not already cut one, and would you need to add connectors yourself since the STL file does not have it).
The 3d preview does not show the hole slots for the insertion of the joints, however if you import the 3mf file as "Import 3d models only", It will show up.