1 / 4
Heater Vent Cover for RVs / WoMo's e.g. Knaus VAN TI MEG — zdjęcie 1
1 / 4

Heater Vent Cover for RVs / WoMo's e.g. Knaus VAN TI MEG

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Heater Vent Cover for RVs / WoMo's e.g. Knaus VAN TI MEG Two parts per outlet / vent.

Ocena
0 / 5
Polubienia
1
Pobrania
29
Wydruki
0
Wyświetlenia
153
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

Heater Vents Covers for WoMos's /RVs e.g. Knaus VAN TI MEG

UPDATE 09.08.2026:

I added the FreeCad File.
In VarSet/Input the vent sizes and other things are adjustable, like:
- Vent length and -width
- Frame thickness
- Amount of holes for the length and width
- Grid parameters.

The result is now symetric, means both halfs can be with the same dimensions now.

Hope that helps, to adapt this to other WoMo's / RVs...
...Hannes

Description

The heating vents in the sleeping area of motorhomes are milled openings, such as those in the Knaus VAN TI MEG, measuring 40 mm x 400 mm.
There’s enough space to stash away cell phones and other small items, for example.
Due to the standard printer size, the vent cover consists of two parts.
Simply insert the parts one after the other into the opening (see pictures).

The parts can also be glued together, but in my experience, this isn’t necessary.

Don't forget to check the dimensions before printing the parts!

We found two different sizes of milled outlets in our VAN TI:
400 mm x 40 mm on the passenger side (same for all three outlets) and
390 mm x 40 mm on the driver side (same for all three outlets).
I think this is because a lot of the van's parts are handcrafted.

I've added two models with lengths of 200 mm and 190 mm.
This gives us a range of 380 mm, 390 mm and 400 mm.

Per part aprx.:

Fillamenet:    around 15 g
Print Time:    about 1 hour
Printer:          Prusa Core One
Settings:       standard
Nozzel:          0.4mm
Layer hight:  0.2mm
Material:       PETG

Happy printing...

...Hannes

Tagi