1 / 1
Rane Channel / Crossfader Mixer Fader Support Block PN 17380 — zdjęcie 1

Rane Channel / Crossfader Mixer Fader Support Block PN 17380

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Improved Rane fader support block, suitable for replacing damaged originals on a large number of Rane DJ mixers.

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
87
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial

17/09/26 - Version 2.0

Improved reproduction of the original Rane fader carrier support block. 

Over time the supports become brittle or threaded from repeated removal. As they are no longer commercially available I decided to make an exact copy of the earlier version which was more robust.

To ensure it no longer strips the thread a cavity has been created to insert a M3 square nut. When paired with a countersunk M3 screw you can now remove the fader as many times as required without any damage.

Suitable for the following models and many others:

  • TTM-56

  • TTM-56S

  • TTM-57SL

  • MP25

  • MP26

  • Sixty One 61

  • Sixty Two 62

  • Sixty Eight 68 

If using UV cured resin I recommend threading the PCB mounting bottom holes with the original screws prior to hardening it in UV chamber or else it will become brittle.

This part is designed to be paired with a M3 square nut:

Square Nut Dimensions: 5.5mm x 5.5mm x 1.8mm 

 

Tagi