Rane Channel / Crossfader Mixer Fader Support Block PN 17380
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved Rane fader support block, suitable for replacing damaged originals on a large number of Rane DJ mixers.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
17/09/26 - Version 2.0
Improved reproduction of the original Rane fader carrier support block.
Over time the supports become brittle or threaded from repeated removal. As they are no longer commercially available I decided to make an exact copy of the earlier version which was more robust.
To ensure it no longer strips the thread a cavity has been created to insert a M3 square nut. When paired with a countersunk M3 screw you can now remove the fader as many times as required without any damage.
Suitable for the following models and many others:
TTM-56
TTM-56S
TTM-57SL
MP25
MP26
Sixty One 61
Sixty Two 62
Sixty Eight 68
If using UV cured resin I recommend threading the PCB mounting bottom holes with the original screws prior to hardening it in UV chamber or else it will become brittle.
This part is designed to be paired with a M3 square nut:
Square Nut Dimensions: 5.5mm x 5.5mm x 1.8mm