1 / 6
Voron Delta Doron Velta BTT 4.3inch TFT mount — zdjęcie 1
1 / 6

Voron Delta Doron Velta BTT 4.3inch TFT mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Standard Doron Velta Skirt height did not allow the 4.3inch TFT to fit, this Mod raises the top lid 6mm.

Ocena
0 / 5
Polubienia
3
Pobrania
4
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Voron Delta Doron Velta BTT 4.3 Inch PiTFT screen mount.

Skirt brim pieces raises the top panel by 6mm, and fits the existing mounting holes on the rear skirts and corner pieces.

A Front bracket and freshly designed case for 4.3inch BTT Pi TFT43 mounts in the middle between the chopped Skirts. Bolts to the 2020 extrusion via aluminium corner brackets or printed corner brackets.

Filler pieces on the chopped DV front skirts closes the gaps either side of the Screen.

Printed in ASA or ABS, 0.4mm layer height

Hardware:

4.3 PiTFT with factory standoffs

1x 200mm PiTFT Ribbon cable.

2x M3 inserts for filler pieces on the front skirts.

14x M3x6 SHCS/BHCS for brims

4x M3x8 FHCS for PiTFT Case

4x M3x10 SHCS/BHCS for brims

3x M3x12 BHCS for top panel.

4x M5x8 BHCS for 2020 Corner mounts and bracket

2x 2020 Corner brackets (slot alignment tabs filed off), could also be printed.

Tagi