Koss KSC75 driver baffle for DT770 PRO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY DT770 PRO driver replacement mod using Koss KSC75 drivers. Designed to fit directly into DT770 cups as a drop-in sty
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DireBynamics mod aka non-Kossher
This model was created to replace broken Dt770 PRO drivers that cost a fortune with Koss KSC75 drivers.
After clicking in the koss KSC75 - the whole construction can drop into the DT770 PRO cup.
The Baffle paper was made using wet wipes that were dried, cut to fit the dimensions of the mod, and glued with superglue.
To complete the mod, i'd suggest adding removable cable mod (jack port) to be added for futureproofing.
Note for the purists: This mod was done not for audio quality, but for fun and out of spite (the DT770 drivers are ridiculously overpriced in my country).
Do enjoy :)