Monstrosity Toolhead (CHC XL/Goliath)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toolhead for TriangleLab CHC XL/Goliath with Dual 5015 Fans
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Toolhead for TriangleLab CHC XL/Goliath with Dual 5015 Fans.
10/17/2026 Adding a V2 with a shorter x carriage and also added a 3rd screw hole to mount onto the x carriage.
V2 also changes all heat inserts to Voron spec (5mm width)
There are two versions, V1 only uses 2 heat inserts on the top to attach the Extruder Plate - should be able to "force" the M3 screws into the holes without the inserts. V2 uses heat inserts in all the places. There is a blank extruder plate that can be edited to fit your extruder. I might add more later but right now i only have the Orbiter 2 plate made.
I am also including a V6 Adapter version for the CHC XL, this was the first version i made and I'm not really making changes to it. This has not been tested for spacing with the vents.
This can be used with either a 4010 Fan (not recommended) or a 3010 fan with the included adapter.
As of right now the length is only for the CHC XL/Goliath. In the future i'm going to add a version for the CHC XL with MZE.
The carriage for the BL Touch has not been tested, let me know if it isn't the correct height for the mount...
If you're feeling generous: https://buymeacoffee.com/lascius3d