Phone charging stand with Pebble
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this stand to work with two Apple Mag Safe chargers (A2580 MX6X3LL/A w/ braded cable) and the Pebble charger.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this stand to work with two Apple Mag Safe chargers (A2580 MX6X3LL/A w/ braded cable) and the Pebble charger. Use a thin USB C cable for the Pebble charger in order to fit all the cables into the channels. You can assemble the two parts
I printed with supports and ironed the top to get a better finish (Still working on that part). Pretty basic settings otherwise, 2 walls, 15% fill.
To assemble the two parts, you'll need two m3-.50 Hex nut and two M3-.50 x 16mm bolts.
I tried to find a middle place between the generic Pebble charging dongle and the new branded Pebble charger.
