Phone charging stand with Pebble
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this stand to work with two Apple Mag Safe chargers (A2580 MX6X3LL/A w/ braded cable) and the Pebble charger.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this stand to work with two Apple Mag Safe chargers (A2580 MX6X3LL/A w/ braded cable) and the Pebble charger. Use a thin USB C cable for the Pebble charger in order to fit all the cables into the channels. You can assemble the two parts
I printed with supports and ironed the top to get a better finish (Still working on that part). Pretty basic settings otherwise, 2 walls, 15% fill.
To assemble the two parts, you'll need two m3-.50 Hex nut and two M3-.50 x 16mm bolts.
I tried to find a middle place between the generic Pebble charging dongle and the new branded Pebble charger.
