Magnet Size Accuracy Test Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnet Size Accuracy Test Block is created to test the dimensional accuracy of 3D-printed models for use with magnets
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
The Magnet Size Accuracy Test Block is created to test the dimensional accuracy of 3D-printed models specifically designed for holding magnets. This tool aids in assuring that magnets will fit snugly and securely. ## Purpose It is primarily used to check the diameter and depth accuracy for various magnet sizes, ensuring that your 3D prints accommodate them perfectly without additional modifications. ## Print Recommendations - Material: PLA or PETG are recommended- Layer height: 0.2mm for a good balance between quality and speed. - Ensure good bed adhesion to prevent warping. Use holes in back of print to remove magnets that fit too snugly.