1 / 4
Doorbell roof for kinetic GB157 or Tecknet bells — zdjęcie 1
1 / 4

Doorbell roof for kinetic GB157 or Tecknet bells

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Weather protection for your doorbell.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Max bell size ~ 104mm x 47.5mm. Max thickness ~ 25mm. 
Mounts to the wall with printed plate and screws, then just slide the housing on. Use double sided tape for the bell itself.
My print settings:
Printer K1max.
Filament: PETG
Layer height: 0.16
Infill: 20-30%
Wall count: 4
Supports: YES (no need for supports on the back, see picture)
Tops/bottoms: 6

Optional Fuzzy skin:

Paint fuzzy skin on the inside and outside side walls. Do not use fuzzy skin on roses for best result and the back face where plate will be inserted. Do not use fuzzy skin on the plate itself too for better fitment. . Printer has to be calibrated to get nice transition from fuzzy wall to smooth rose.

Noise type: Ridged multifractal
Point distance: 0.2
Thickness: 0.15
Feature size: 0.4

Tagi