Bosch Indego S500 rear wheels V1 [commercial use]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slim and stylish, yet sturdy rear wheel for Bosch Indego S500 robotmowers.
- Ocena
- 0 / 5
- Polubienia
- 3
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Commercial Use
Note: This is the version for commercial use! See the license details below.
You are allowed to print these wheels for yourself. Take a look at the personal and free version on
Update 2024-11-11
I've created another wheel (V3) to counter some issues I've experienced during previous seasons.
Description
While I really like my Bosch Indego S500 robotmower, it has a few drawbacks. One of the more frustrating issues, is that the wheels lack any grip unless it's driving on a perfect flat, dry and bumpfree lawn.
Countless times I found the robot stuck in some hole it has digged itself into, but no more!
There are some wheels available on the world wide web, but none of them looked the way I wanted. The solution for me was to create my own, deep-dish replacements. The focus was to have a sturdy yet slim wheel with a more ‘trendy’ design than others (subjective, I know!). It's also designed so it didn't need any supports, except for the center if you place it on it's back to print.
Print specifications
Material:
PETG to allow some flex and resist UV.
Print settings:
Print it lying on its back (side that faces the robot)
Layer height: 0.2mm
Perimeters: 4
Solid layers (top and bottom): 5
Infill: Gyroid 10%
Support material:
Overhang: 25°
There are 2 GCODE files available for the full wheel. Both use 4 perimeters.
One for a single color wheel;
One for a duo color wheel
First part is for a cheaper or less used color (160 grams) until the center cap (28.40mm) (for me Orange).
After 12h15mins it uses a M600 command to switch filament.Second part is for the deep dish and visible spokes. It's what I'll see the most when the robot is stalled in it's garage, so I picked a more stealthy color (black).
Disclaimer
This model works on my own Bosch Indego S500+, but results may vary depending on printer settings, materials, and mower condition. I am not liable for any damage, malfunction, or loss resulting from printing, modifying, using, or selling physical prints of this model. You print, use and/or modify physical prints at your own risk.
License
This is the commercial-use version of the Indego S500+ wheels. By purchasing this version, you receive a non‑exclusive commercial license that allows you to:
Print and sell physical copies of these wheels
Use the design in your own repair or print‑on‑demand service
Modify the design for your own commercial use (as long as you do not redistribute the digital design files¹
You are NOT allowed to:
Sell, share, or redistribute the digital design files¹
Upload the files to any platform
Offer sublicenses to others
¹ : including but not limited to STL, STEP, 3MF, OBJ or modified versions thereof
For personal use, please download the free CC BY‑NC‑SA version here: 👇