Rubber washer for fairings compatible with Honda Africa Twin XRV 750
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The rubber washers on the plastic covers wear out and breaks, so here is a simple replacement - Print in TPU or similar.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Open Community License v1
The rubber washers on my Honda Africa Twin RD07A (1998) was getting very hard and some where missing so i made a qucik & dirty design in tinkercad since i had some TPU laying around.
They turned out great as a replacement for the original.
Made some versions:
1.5mm thickness = original replacement
2mm / 2.5mm / 3mm = thicker is you have a fairing that is vibrating or loose
With sleeve = If your fairing has been vibrating for some time, the hole might have become bigger, and this with make if fit tight hopefully.
With bumps = if you have a small missalignment or the fit is not 100% straight, these might help you fill in the gaps.
Hope this helps someone else!