Rubber washer for fairings compatible with Honda Africa Twin XRV 750
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The rubber washers on the plastic covers wear out and breaks, so here is a simple replacement - Print in TPU or similar.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Open Community License v1
The rubber washers on my Honda Africa Twin RD07A (1998) was getting very hard and some where missing so i made a qucik & dirty design in tinkercad since i had some TPU laying around.
They turned out great as a replacement for the original.
Made some versions:
1.5mm thickness = original replacement
2mm / 2.5mm / 3mm = thicker is you have a fairing that is vibrating or loose
With sleeve = If your fairing has been vibrating for some time, the hole might have become bigger, and this with make if fit tight hopefully.
With bumps = if you have a small missalignment or the fit is not 100% straight, these might help you fill in the gaps.
Hope this helps someone else!