Holder compatible with GIRA light switch 2024 refresh
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compatible holder for GIRA System 55 light switch after 2024 refresh.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
GIRA System 55 Alternative Rocker Holder (Post-2024 Refresh)
This is a 3D-printable alternative holder for the GIRA System 55 light switch ecosystem, specifically designed to fit the updated system released from 2024 onwards.
The Problem This Solves
In the official retail setup, the original holder is permanently bundled with the GIRA 329627 rocker (which mounts onto the GIRA 310600 light switch).
If you want to 3D print your own custom style or color rockers, you are normally forced to buy the expensive original retail rocker just to get the plastic holder inside. This model eliminates that bottleneck, allowing you to go 100% DIY by pairing this holder with any of the custom frame and rocker designs available online.
🛠 Print Settings & Advice
Orientation: Print the file upside down (with the "feet" pointing up, away from the build plate).
Why?: Printing it in this direction ensures that removing the necessary support structures won't accidentally snap the delicate feet off the model.
Print settings: Top z-distance of 0.27 mm and top interface spacing of 0.55 mm ensured reasonable support removal. 0.2 mm nozzle with PETG worked great.