1 / 1
theCUBE - Display Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Other required material:
- 6 pcs PMMA plates 200x200x4 mm
- superglue (optional, depending on precision of printed parts)
1. Lid
 | Join 4x top_bar (green) with 4x top_corner around 1x PMMA plate (blue) |
 | Add 4xtop_corner_joint (orange). Use glue if does not hold well. |
 | Finished top lid. |
2. Vertical Bars Preparation
 | Place a foot (black) on the vertical_bar (green). Use 2x pin (blue) to secure the foot on place. |
 | Insert 2x pin (blue) into empty holes |
3. Base
 | Use vertical bars from prevoius step, 1x PMMA plate and 4x bottom_bars (purple) and connect the together as pictured on the left. |
 | Insert bottom_corner_joint (orange) into all 4 corners. Use glue if necessary. |
3. Side Walls
 | Insert PMMA plate () between vertical_bars |
 | Add bridge (orange). Use glue if needed but let it dry well because you might not be able to remove top lid then :) |
 | Repeat previous steps for other sides. |
4. Final
 | Put your items inside and place the lid on to the top |