Quick Clamp Holder Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Generic wall mounted quick clamp holder, for max 38mm and 30mm teeth
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall mounted quick clamp holdes in two typs.
Max 38mm quick clamp teeth - 2 slot, if combined with the mirrored version 4 slot
Max 30mm quick clamp teeth - 3 slot, if combined with the mirrored version 6 slot
They are designed in 2 pieces that fit 2 OR 3 clamps each.
You don't have to print both, or mount them like i have done in the picture.
They are not meant to cross combine nicely 38mm with mirrored 30mm for example, however it is possible
But if you do want the 4/6 slot solution, print one of each file (the normal one and mirrored)
The screw holes are 5mm in diameter.
Filament
I recommend , PETG-CF, ABS (-GF) or ASA(-CF).
Personally i've printed it in Bambulab PETG HF. It works, but i do see that a stiffer material would have been better or something that withstands weight creep a little better than PETG.
Print Settings
Orientation like the picture.
Supports are optional, i personally prefer to use it.
Layer height 0.2mm
4 Walls (Perimeters)
1.2mm top and bottom layer
Gyroid or Cubic infill I recommend min 15-20% (What I used 15%)
I also have a generic model for Bahco quick clamps here: